News Center

——  NEWS CENTER  ——

News Center
Contact Us

Xi'an Shenghongchuang Instrument Co., Ltd.

Contact: Mr. Zhang

Mobile: 15529283736
Email: shc-sensor@qq.com

Address: Fortune Building, Sanqiao Street, Xixian New Area, Xi'an, Shaanxi Province

What Is the Difference Between 316 and 316L Pressure Transmitters?
Added to Favorites:125

Difference Between 316 and 316L Pressure Transmitters: Check the Material Grade, Not Just the Product Name

When selecting a pressure transmitter, “316” and “316L” usually refer to the stainless steel materials used for wetted parts, such as impulse pressure fittings, isolation diaphragms, process connections, or housings. Both are molybdenum-containing austenitic stainless steels suitable for general water treatment, mildly corrosive chemical media, food equipment applications, and most industrial automation scenarios, but this does not mean they can be used interchangeably in all cases.

The core difference between 316 and 316L pressure transmitters lies in carbon content control. The “L” in 316L stands for low carbon, which generally means a lower maximum carbon content. Variations in carbon content affect the risk of intergranular corrosion after welding and further affect transmitter reliability under complex media, frequent thermal cycling, and long-term continuous operation.

During procurement, it is not sufficient to check whether the quotation lists “316 stainless steel” or “316L stainless steel.” The material certification of the actual pressure-bearing wetted parts, diaphragm material, welding structure, sealing method, and operating temperature should also be confirmed. For standard non-welded wetted structures, 316 often provides good suitability; for welded isolation diaphragms or operating conditions with higher corrosion risks, 316L usually offers greater engineering value.

I. Main Differences in Chemical Composition Between 316 and 316L

Both 316 and 316L use chromium, nickel, and molybdenum as key alloying elements. Molybdenum improves the material’s resistance to pitting corrosion when exposed to chlorides, certain acidic media, and marine humid environments. Compared with the commonly used 304 material, the 316 series generally offers better corrosion resistance in chloride-containing media and is therefore often used in industrial pressure measurement, level measurement, and fluid control systems.

The most important difference between them is carbon content. The carbon content of 316 stainless steel is generally no more than 0.08%, while that of 316L is generally no more than 0.03%. Although the difference appears to be only 0.05 percentage points, low-carbon materials are less likely to form precipitates that affect corrosion resistance under conditions involving welding heat-affected zones, high-temperature exposure, or long-term contact with corrosive media.

For pressure transmitters, material performance must be evaluated in conjunction with the product structure. If the sensor uses a diffused silicon sensing element with a 316L isolation diaphragm, the medium actually contacts the diaphragm and process interface; if a ceramic sensing element or dry structure is used, the material grades of threaded fittings, sealing rings, and weld locations must also be verified to avoid focusing on only one component while overlooking the overall media resistance.

Comparison Item316 Stainless Steel316L Stainless SteelImpact on Pressure Transmitter Selection
Maximum Carbon ContentApprox. 0.08%Approx. 0.03%316L is more suitable for applications focused on corrosion resistance in welded areas
Role of MolybdenumOffers good resistance to pitting corrosionOffers good resistance to pitting corrosionBoth are superior to standard 304 wetted parts
Post-Welding PerformanceRequires greater attention to process controlOffers greater resistance to intergranular corrosionFor welded diaphragms and welded flanges, 316L should be verified as a priority
Common ApplicationsGeneral industrial fluids and standard corrosive environmentsChemical, pharmaceutical, hot and humid, and continuously operating systemsDetermine comprehensively based on the medium, temperature, and welded structure

II. Corrosion Resistance Differences Should Be Evaluated Based on Medium Concentration and Temperature

316L is not necessarily “more corrosion-resistant” than 316 in every environment. Since their chromium, nickel, and molybdenum systems are similar, the actual performance difference may not be obvious when handling clean water at ambient temperature, compressed air, standard hydraulic oil, and most neutral media. The factors that truly create a difference are often welding areas, impurities in the medium, accumulated liquid during shutdown, and temperature fluctuations.

For example, in circulating water systems containing a certain level of chloride ions, chloride concentration, medium temperature, flow velocity, and dissolved oxygen can all affect the corrosion process. When the temperature rises from ambient temperature to 60°C or 80°C, the risk of pitting corrosion on the material surface may increase significantly. If equipment has crevices, welds, deposits, or long-term low-flow dead zones, the actual risk is generally higher than indicated by laboratory material data.

For hydrochloric acid, hot concentrated alkalis, strongly oxidizing acids, fluorine-containing media, or high-concentration chloride media, 316L may still fail to meet long-term service requirements. Such applications may require Hastelloy, tantalum diaphragms, PTFE corrosion-resistant structures, or remote capillary flange isolation solutions. Treating 316L as a “universal corrosion-resistant material” can easily lead to transmitter diaphragm corrosion, zero drift, or even medium leakage.

Four Parameters Should Be Carefully Verified Under Complex Operating Conditions

The first is medium composition. Rather than simply specifying “wastewater,” “acid solution,” or “chemical liquid,” the main chemical substances, concentration range, impurities, and chloride ion content should be clearly identified. The second is medium temperature. Suitability at ambient temperature does not mean suitability at high temperature, and temperature changes also affect sealing materials, filling fluids, and sensor zero stability.

The third is pressure range and fluctuation frequency. For a pressure transmitter with a rated range of 1MPa, long-term pulse impacts close to full scale increase the fatigue risk of the diaphragm and sensing element. In engineering practice, normal operating pressure is generally recommended to remain within 30% to 80% of the measuring range, with an appropriate margin reserved for instantaneous impact pressure.

The fourth is installation method. Threaded direct mounting, clamp connections, flange connections, and remote capillary transmission have different stress conditions. If vibration, heat conduction, or pipeline pulsation is present on site, buffer tubes, dampers, or heat dissipation devices should also be added. After selecting the right material, correct installation and protection are necessary to fully realize its service life.

III. Weldability Is an Important Reason for Using 316L in Isolation Diaphragms

The wetted assemblies of industrial pressure transmitters often involve laser welding, argon arc welding, or other precision welding processes, especially for flush diaphragm pressure transmitters, sanitary pressure transmitters, flange-mounted level transmitters, and isolation differential pressure transmitters. Changes in the microstructure of welded areas affect local corrosion resistance, which is why low-carbon 316L is widely used in these structures.

The low-carbon properties of 316L reduce the likelihood of intergranular corrosion after welding, enabling welds and heat-affected areas to maintain more stable performance in specific corrosive environments. This characteristic is particularly important for isolation diaphragm assemblies that require long-term sealing, cannot be disassembled, and directly contact the medium, helping reduce the risk of measurement inaccuracy caused by localized corrosion.

However, 316L material cannot replace standardized welding processes. Uneven weld formation, excessive residual stress, untreated surface oxide layers, and insufficient post-weld cleaning may all become starting points for corrosion. When selecting a pressure transmitter, attention should be paid to whether the manufacturer has quality control procedures such as precision welding, helium testing or seal leak testing, pressure cycle testing, and finished-product calibration.

Application ScenarioRecommended MaterialRecommended ConfigurationSelection Reminder
Compressed air, clean water, hydraulic oil316 or 316LConventional threaded pressure transmitterFocus on confirming the measuring range, connection, and output signal
Food, pharmaceutical, and scale-forming media316L preferredSanitary flush diaphragm structureConfirm clamp specifications and surface finish requirements
Chemical storage tanks and corrosive liquids316L or higher-grade alloysIsolation diaphragm or remote seal flangeMust be confirmed according to medium concentration and temperature
High-temperature steam and thermal oil systems316L wetted partsWith a heat dissipation structure or condensate loopAlso verify the maximum medium temperature

IV. How to Select Between 316 and 316L Pressure Transmitters

For procurement personnel, the cost-effectiveness analysis of 316 pressure transmitters should not be limited to the purchase price per unit. In standard civil applications involving water pumps, air compressors, hydraulic power units, filtration equipment, and general machinery, products with qualified 316 wetted parts can meet most measurement requirements when the medium is stable, the temperature is low, and there is no obvious corrosiveness, balancing cost and durability.

For technical evaluation personnel, if a project involves welded isolation structures, humid saline environments, mildly corrosive liquids, sanitary processes, or long continuous equipment operating cycles, it is more reasonable to prioritize 316L wetted diaphragms. Their value mainly lies in reducing long-term maintenance risks rather than simply pursuing a higher material grade.

It is also necessary to confirm whether performance parameters are compatible: common output signals include 4-20mA, 0-10V, RS485, or other communication methods; overall accuracy can be selected as 0.5%FS, 0.25%FS, or higher according to control requirements; common protection ratings include IP65, IP67, and IP68. For high-speed pressure transmitters, attention should also be paid to whether the response time meets 5ms, 10ms, or the speed required by the control system.

V. Do Not Overlook Surface Treatment, Sealing Materials, and Calibration Capability

The surface treatment method of stainless steel pressure transmitters also affects actual performance. Common treatments include mechanical polishing, electrolytic polishing, pickling and passivation, and sandblasting. For sanitary media or media prone to adhesion, surface roughness control is more important; for general industrial sites, the focus should be on preventing local corrosion caused by scratched interfaces, weld oxidation, and long-term scale accumulation.

Sealing materials must be verified together with the medium. NBR is suitable for certain oil media, FKM is suitable for a wider temperature range and various industrial media, EPDM is commonly used for hot water, steam, and certain cleaning applications, while PTFE has broader chemical resistance. Even when 316L is selected for wetted metal parts, incompatible sealing ring materials can still cause swelling, aging, or leakage.

Xi'an Shenghongchuang Instruments & Meters Co., Ltd., supported by the manufacturing base of Shaanxi Qinkong Sensor Technology Co., Ltd., can provide standard products and non-standard customization services for pressure, level, differential pressure, temperature and humidity, weighing, displacement, and flow measurement and control requirements. For projects with complex media, limited installation space, or special interface requirements, it is recommended to provide the medium name, temperature, pressure range, installation dimensions, output signal, and on-site operating conditions. Technical personnel can then confirm a suitable solution using 316, 316L, or a higher corrosion-resistance grade, reducing subsequent modification and downtime maintenance costs.

VI. Conclusion: Selecting Materials According to Operating Conditions Maximizes the Long-Term Value of Pressure Transmitters

The differences between 316 and 316L pressure transmitters mainly lie in the weldability and adaptability to complex corrosive environments provided by the low-carbon design. For standard operating conditions, 316 offers good practicality; for welded isolation diaphragms, sanitary equipment, continuous operation, or scenarios with a risk of intergranular corrosion, 316L is usually a more worthwhile priority choice.

Material grade is only one part of selection. A complete assessment should also cover medium corrosiveness, temperature and pressure, overload impact, installation structure, surface treatment, sealing materials, accuracy grade, and output method. Only by matching wetted materials to on-site conditions can stable measurement data be ensured and the maintenance cycle of industrial automation systems be extended.

If you are comparing 316 and 316L pressure transmitters, you can compile the medium parameters, measuring range, interface specifications, and operating temperature of your existing equipment and obtain targeted material confirmation, product selection, and non-standard customization recommendations from the Shenghongchuang technical service team, providing a more reliable basis for project procurement and on-site operation.

Submit