News Center
—— NEWS CENTER ——
Xi'an Shenghongchuang Instrument Co., Ltd.
Contact: Mr. Zhang
Mobile: 15529283736
Email: shc-sensor@qq.com
Address: Fortune Building, Sanqiao Street, Xixian New Area, Xi'an, Shaanxi Province
What certifications are required for pressure transmitters used in civil applications? For scenarios such as water supply booster systems, HVAC, building automation, fire water systems, wastewater treatment, and equipment integration, selection should not be based solely on measuring range, accuracy, and quotation. It is also necessary to verify whether the product has metrology, quality, safety, and environmental adaptability documentation matching its actual application. More certifications are not necessarily better; the key is that certificates are authentic, valid, model-specific, and able to cover the project location, medium characteristics, and installation environment.
Pressure transmitters typically convert pressure signals into 4-20mA, 0-10V, RS485, or other standard signals, serving as an important front-end for control systems to obtain pressure data. Although civil operating conditions are generally less demanding than hazardous industrial environments such as petrochemicals, they may still involve drinking water contact, humid environments, electromagnetic interference, metrological acceptance, and public safety requirements. During procurement, a four-way correspondence should be established among “application requirements, product model, compliance documents, and test records.”
Xi'an Shenghongchuang Instrumentation Co., Ltd. and its production base, Shaanxi Qinkong Sensor Technology Co., Ltd., can provide product selection, non-standard adaptation, and technical services for industrial measurement and control requirements involving pressure, level, temperature and humidity, flow, and more. For civil pressure transmitter projects, it is recommended that technical personnel confirm the documentation list before ordering based on the medium, pressure range, power supply method, output protocol, and installation location, thereby avoiding certificate mismatches or insufficient configurations during subsequent acceptance.
Many procurement personnel ask whether there is a “metrology license,” but it should first be clarified whether the equipment is subject to local metrology supervision, mandatory verification, or project acceptance requirements. When pressure transmitters are used for trade settlement, public safety monitoring, important energy metering, and similar purposes, verification, calibration, or filing may be required in accordance with local regulations. When used for general equipment control, factory inspection records and third-party calibration certificates are more commonly provided.
Calibration certificates should be checked particularly for the model, serial number, measuring range, accuracy class, calibration points, environmental conditions, and validity date. For example, for a product with a range of 0-1.0MPa, calibration points may cover typical positions such as 0%, 25%, 50%, 75%, and 100%. Documents that are merely generic templates and do not indicate the unique equipment number cannot readily prove that the specific product has undergone the corresponding calibration.
For projects requiring metrological traceability, priority should be given to suppliers with complete calibration capabilities and quality processes. Shenghongchuang pressure transmitters can be configured with the required measuring range, output, and interface type according to project requirements, together with factory test information. Purchasers should also confirm the recalibration interval. For conventional applications, a maintenance plan of 6 to 12 months can generally be developed based on equipment importance and site stability.
It should be noted that metrological compliance is not equivalent to explosion-proof compliance, nor is it equivalent to export compliance. Even if a product has calibration records, these cannot replace explosion-proof certificates, EMC test reports, or documentation related to drinking water contact. The applicable scope of documentation must be consistent with the on-site risk boundaries.
For ordinary residential water supply, secondary building water supply, air-conditioning water circulation, and general pump stations, explosion-proof pressure transmitters are generally not required if there is no release of flammable gas, vapor, or dust. In such applications, greater attention should be paid to the protection rating, moisture resistance, surge resistance, wetted material, and long-term drift control. For common outdoor or humid installation locations, it is important to verify whether protection capabilities such as IP65 and IP67 meet the actual wiring and connection method.
When a transmitter is installed near gas facilities, in oil storage and transportation areas, spray rooms, solvent-use areas, or spaces with combustible dust, the hazardous area classification must be determined by project safety conditions before selecting a matching explosion-proof product. Decisions must not be based solely on “explosion-proof” promotional claims, nor may certificates for other models be applied to the model currently being procured.
At a minimum, verification of an explosion-proof product certificate should include the product name, complete model, explosion-proof marking, certificate status, and conditions of use. Different explosion-proof types, such as flameproof and intrinsically safe types, have requirements for installation methods, matching safety barriers, grounding, and cable entry devices. Even if the product itself is compliant, non-compliant on-site wiring will affect the safety of the entire circuit.
For civil fire protection, water supply and drainage, and building projects, electromagnetic compatibility is also worth attention. Variable-frequency drives, motor starts and stops, and long-distance cables may cause signal fluctuations. It is recommended to select products with reverse-polarity protection, overvoltage protection, and anti-interference design, and to conduct complete system commissioning under 24VDC power supply, 4-20mA output, or RS485 communication conditions.
When used for secondary domestic drinking water supply, in addition to pressure measurement performance, it is necessary to confirm whether wetted component materials and sealing materials meet project requirements. Common wetted metals include 304, 316, or 316L stainless steel. The actual selection should be determined by water quality, chloride ion concentration, temperature, and maintenance conditions, rather than solely by the material name.
If tender documents, local authorities, or the construction entity impose sanitary safety requirements for drinking water contact materials, corresponding supporting documents should be requested in accordance with project provisions. Material descriptions, seal descriptions, and batch inspection data provided by the supplier should correspond to the specific product configuration, avoiding confusion between standard models and drinking water-specific configurations.
For locations with significant pressure fluctuations, such as pump outlets, it is recommended to reserve a certain margin for the upper range limit. For example, for a system with a normal pressure of 0.6MPa, the full scale should not be selected only at 0.6MPa. Water hammer, pump start-stop peaks, and system design pressure must also be assessed comprehensively to reduce the risk of overpressure damage and long-term zero drift.
The CE marking is primarily intended for the EU market and is a declaration made by the manufacturer after completing conformity assessment in accordance with applicable regulations or directives. When exporting pressure transmitters to Europe, EMC, RoHS, and other requirements related to product characteristics often need to be assessed. The specific applicable scope depends on the supply voltage, functions, operating environment, and whether the product forms part of a complete device.
Ordinary pressure transmitters sold in mainland China are not necessarily included in the CCC compulsory product certification catalogue. Procurement personnel should not directly determine that a product is non-compliant simply because it lacks CCC certification, but should rely on the latest catalogue, project contract, industry specifications, and owner requirements. If the system includes power modules, control cabinets, or other electrical equipment, the compliance requirements for the relevant components should be checked separately.
Documentation such as RoHS, REACH, environmental reliability testing, and salt spray testing is more often used for export, procurement in specific industries, or product quality assessment. For coastal, high-humidity, and highly corrosive environments, surface treatment, welding quality, sealing structure, and salt spray performance often have a more direct impact on service life than the name of a single certificate.
It is recommended to manage “certification certificates,” “test reports,” “declarations of conformity,” “material certificates,” and “calibration certificates” separately. The first two categories are generally issued by specific institutions or laboratories, declarations of conformity are signed by the responsible entity, and material and calibration documents should be traceable to specific batches or serial numbers; they cannot replace one another.
Before procurement, six basic parameters should be specified: measuring range, medium temperature, process connection, output signal, supply voltage, and installation environment. For example, threaded connections may be G1/4, G1/2, or M20×1.5, and outputs may be 4-20mA two-wire or RS485. Any difference may prevent the product from being installed directly or connected to the existing control system.
For acceptance, it is recommended to use a “three-way comparison” method: first, compare the nameplate with the order model; second, compare the model range in the certificate or report with the actual product; third, compare the site installation conditions with the product technical requirements. For bulk procurement, zero point, full-scale output, and communication stability can be sampled and inspected by batch, while records such as serial number, installation location, and calibration date should be retained.
Accuracy selection should serve the control objective. For general civil water supply monitoring, an accuracy class of 0.5%FS can meet most requirements. When the system requires more precise pressure control, energy consumption analysis, or critical process recording, a 0.25%FS accuracy class and temperature drift indicators may be further evaluated. Higher accuracy does not mean greater cost-effectiveness in all applications; installation vibration, temperature changes, and maintenance capability must also be considered in practice.
Xi'an Shenghongchuang can assist in confirming the measuring range, accuracy, material, protection, explosion-proof rating, and output configuration of pressure transmitters for civil water supply, HVAC, water treatment, and equipment integration applications, and provide support for verifying corresponding product documentation. By submitting information on the on-site medium, design pressure, interface size, power supply method, and project certification requirements, you can obtain selection recommendations and quotation solutions better suited to actual operating conditions.
Related Recommendations