News Center

——  NEWS CENTER  ——

News Center
Contact Us

Xi'an Shenghongchuang Instrument Co., Ltd.

Contact: Mr. Zhang

Mobile: 15529283736
Email: shc-sensor@qq.com

Address: Fortune Building, Sanqiao Street, Xixian New Area, Xi'an, Shaanxi Province

What is the price of Xi'an Shenghongchuang temperature- and pressure-compensated level sensors?
Added to Favorites:125

What Factors Affect the Price of Xi'an Shenghongchuang Temperature- and Pressure-Compensated Level Sensors

The price of Xi'an Shenghongchuang temperature- and pressure-compensated level sensors is not a single fixed value. It is jointly determined by the measurement principle, measuring range, compensation accuracy, wetted material, output signal, installation method, and site operating conditions. For procurement personnel, quotation comparisons should not focus only on the unit price; they should also confirm whether the actual operating environment and configuration are consistent. Otherwise, low-priced products may fail to meet long-term stable measurement requirements.

Temperature- and pressure-compensated level sensors are primarily used in level measurement applications where medium temperature and ambient pressure vary significantly. Ordinary level transmitters may experience zero drift and increased indication deviation under conditions such as high temperature, sealed tanks, pressure fluctuations, or changes in medium density. After temperature compensation, pressure compensation, or algorithm calibration is added, the equipment can better adapt to complex operating conditions, while the corresponding manufacturing and commissioning costs also increase.

From a procurement perspective, products for conventional low-pressure applications, water-based media, and standard outputs are generally priced within a relatively controllable range. When a project involves high-temperature media, corrosive liquids, hazardous areas, long-distance transmission, food hygiene requirements, or non-standard flange installation, the formal quotation confirmed after the technical agreement should prevail. Shenghongchuang can provide suitable configurations based on level height, medium properties, and on-site structure, avoiding rework caused by omitted parameters.

Measuring Range, Accuracy, and Compensation Range Determine the Basic Configuration

Measuring range is one of the primary parameters affecting the price of temperature- and pressure-compensated level sensors. Common measuring ranges can cover 0 to 1 m, 0 to 5 m, 0 to 10 m, 0 to 20 m, and even higher liquid columns. Different ranges require matching sensing elements, structural strength, and calibration solutions. An excessively small range can easily exceed limits during level fluctuations, while an excessively large range may reduce effective resolution. Therefore, the range should not simply be enlarged based on the idea of “leaving sufficient margin.”

Accuracy grade also affects procurement cost. Conventional industrial level measurement commonly uses 0.5%FS or 0.25%FS as a reference, while high-precision process control applications may require lower overall error. Accuracy here should distinguish between static accuracy at room temperature, overall accuracy after temperature changes, and stability after long-term operation. Especially in tank metering, batching control, and level interlock projects, factory accuracy alone is insufficient to determine actual performance.

A wider compensation range usually means that the product requires calibration at more temperature zones and pressure points. For example, products suitable for room-temperature environments differ significantly from those suitable for operating temperature ranges of -20℃ to 80℃ or even wider ranges in sensor element selection, electronic circuit design, and calibration procedures. Before procurement, the medium temperature, ambient temperature, tank pressure, and frequency of pressure fluctuations should be clarified.

Materials, Protection, and Signal Interfaces Affect the Final Quotation

Wetted materials must be compatible with the measured medium. For conventional media such as clean water and circulating water, commonly used stainless steel structures can generally meet requirements. For acid and alkali solutions, salt spray environments, wastewater, oil products, or particle-containing media, 316L stainless steel, sealing materials, pressure-guiding structures, and anti-clogging designs require further evaluation. Incorrect material selection may cause corrosion, leakage, or abnormal signals in the sensor within a few months.

Protection ratings also result in price differences. Installation near an indoor control cabinet and at outdoor sites that are humid, dusty, or frequently washed down impose different requirements on enclosure sealing, cable outlet methods, and connector structures. Protection designs such as IP65 and IP67 should be determined based on the actual installation location. If the sensor is continuously submerged or exposed to a high-humidity condensation environment, cable sealing and the waterproof capability of the wiring chamber should also be confirmed as priorities.

Common output options include 4-20mA, 0-10V, RS485, and other protocol interfaces. 4-20mA is suitable for stable long-distance transmission in industrial environments, while RS485 is more convenient for connection to smart instruments, PLCs, and host computer systems. If the project requires local display, high/low limit alarms, remote communication, or compatibility with an existing control system, this should be specified at the inquiry stage to avoid subsequently added costs for modules, converters, or modifications.

Price FactorsStandard Configuration FeaturesComplex Operating Condition Configuration FeaturesKey Purchasing Considerations
Measuring RangeCommon ranges such as 0–5 m and 0–10 mUltra-low ranges, long ranges, or special liquid column conversionsConfirm the maximum liquid level and safety margin
Accuracy0.5%FS measurement accuracy requirement0.25%FS and temperature drift control requirementsVerify total error rather than single-point accuracy
MaterialStandard stainless steel and standard sealing316L, corrosion-resistant sealing, or sanitary constructionProvide medium composition and concentration information
Functions4–20 mA standard outputTemperature and pressure compensation, RS485, explosion-proof, displayConfirm control system interface and certification requirements

How to Determine Whether a Configuration Is Worth the Investment Under Different Operating Conditions

The value of temperature- and pressure-compensated level sensors is mainly reflected in reducing measurement deviations and maintenance frequency under complex operating conditions. If the site involves an atmospheric open water tank, minor liquid temperature variation, and measurement only for high/low level indication, a standard level transmitter can generally meet the requirements. If used for sealed vessels, steam-traced pipelines, chemical storage tanks, or hot medium storage, errors caused by temperature and pressure changes need to be carefully evaluated.

For high-temperature liquids, temperature changes may affect the sensor element output and may also alter medium density. Taking liquid column hydrostatic pressure measurement as an example, at the same level height, a change in medium density directly affects the pressure value. Therefore, correction is required in product selection or the control algorithm. During non-standard customization discussions, Shenghongchuang will focus on verifying the medium temperature range, density changes, and whether site conditions such as cooling sections and impulse pipes are present.

For pressurized vessels, vapor-phase pressure inside the vessel is superimposed on the hydrostatic pressure of the liquid level. In this case, if only a single-point pressure signal is used to calculate level, pressure fluctuations may be misinterpreted as level changes. Differential pressure measurement, pressure compensation, or dual-signal linkage solutions can improve result reliability. Although the initial procurement cost increases, they can reduce operating losses caused by false alarms, material overflow, and manual verification.

Selection Differences Between Atmospheric and Sealed Vessels

The level measurement logic for atmospheric open vessels is relatively straightforward, with emphasis on measuring range, medium compatibility, installation depth, and cable length. For applications such as pools, clean water tanks, and sewage wells, sediment, floating debris, liquid surface fluctuations, and pump start-stop impacts should also be considered. If necessary, reading stability can be improved by optimizing the installation position or adding damping settings.

Level measurement for sealed vessels needs to include the internal operating pressure of the vessel in the calculation. If vapor-phase pressure is stable, an appropriate compensation method can be selected according to the system structure. If pressure changes frequently, a differential pressure measurement solution or a level measurement and control solution capable of pressure correction should be prioritized. Procurement personnel should provide the vessel's maximum operating pressure, normal pressure range, and pressure fluctuation conditions.

For equipment operating under vacuum, slight negative pressure, or significant pressure pulsation, installation details are more important than parameters alone. Pressure tapping point location, impulse pipe arrangement, condensate effects, and vibration conditions can all interfere with actual measurement. A mature solution should cover the product itself, mechanical installation, and signal processing simultaneously, rather than using only “high accuracy” as the basis for selection.

Parameters That Should Be Prioritised for High-Temperature and High-Pressure Applications

Under high-temperature conditions, the medium temperature and ambient temperature should first be distinguished. The temperatures borne by the sensor parts directly contacting the medium, the location of the electronics compartment, and the cable outlet may not be the same. At some sites, heat dissipation structures, isolation devices, or remote installation can reduce the impact of heat on electronic components. The actual solution must be determined according to equipment space and maintenance conditions.

Under high-pressure conditions, rated pressure, overload pressure, burst pressure, and the grade of connecting threads or flanges should be verified. When equipment operates close to full scale for extended periods, a reasonable pressure margin is recommended, while excessive enlargement of the range should be avoided to prevent loss of level resolution. Buffering measures must also be considered for pump outlets or pulsating pipelines with substantial pressure shocks.

Quotations for complex projects should include complete parameters rather than simply stating “temperature- and pressure-compensated level sensor.” At a minimum, the measuring range, medium name, medium temperature, operating pressure, supply voltage, output type, process connection, cable length, protection requirements, and installation quantity should be specified. The more complete the parameters, the more meaningful the supplier's configuration and price will be for comparison.

Application ScenarioMain RiskRecommended Configuration DirectionRequired Information for Quotation
Atmospheric-pressure water tankLiquid level fluctuations, humidity, sediment buildupStandard level transmitter, protected cable outletLiquid depth, medium, cable length
High-temperature storage tankTemperature drift, density changes, seal agingWide-temperature compensation, heat-resistant construction, compatible materialsMaximum temperature, medium density, installation location
Sealed Pressure VesselSuperimposed vapor-phase pressure, pressure fluctuationsDifferential pressure or pressure-compensated measurement solutionOperating pressure, fluctuation range, connection type
Corrosive medium tankCorrosion, crystallization, leakage316L and compatible seals, corrosion-resistant constructionComposition, concentration, temperature, cleaning method

How to Compare Cost Performance When Procuring Temperature- and Pressure-Compensated Level Sensors

When comparing prices of Xi'an Shenghongchuang temperature- and pressure-compensated level sensors, the principle of “same parameters, same operating conditions, and same service scope” should be applied. Comparing only the per-unit amounts quoted by different brands or suppliers can easily overlook differences in sensing element grade, compensation method, material specifications, calibration requirements, and delivered accessories, ultimately resulting in an apparently low price but a higher actual cost.

Cost performance with real reference value should include procurement cost, installation adaptation cost, system commissioning cost, daily maintenance cost, and downtime risk cost. For automated production lines, chemical energy equipment, or continuous production processes, sensor stability directly affects control signal reliability. On-site disassembly and installation, production shutdown troubleshooting, and material loss caused by a single selection error are usually more costly than the price difference of the product itself.

Before financial approval, it is recommended to break down the quotation into items such as standard product price, non-standard customization cost, communication or display accessories, cables and installation accessories, test documentation, and after-sales support. This facilitates budget control and prevents quotations for basic models from being confused with the actual implemented configuration. For bulk procurement projects, a comprehensive evaluation can also be conducted based on delivery time, spare parts strategy, and unified interface standards.

Common Omissions to Avoid in Low-Price Procurement

The first type of omission is failing to confirm medium conditions. The same liquid name does not mean that corrosivity, viscosity, temperature, and impurity content are the same. For example, industrial wastewater, saline solutions, and high-temperature oil products may all affect sensor isolation diaphragms, seals, and lead wires differently. Complete medium information is the basis for determining whether materials and structures can be used reliably over the long term.

The second type of omission is overlooking installation conditions. Submersible, flange-mounted, threaded, and side-mounted level measurement solutions have different installation logic. Space at the bottom of the tank, opening dimensions, probe insertion depth, and maintenance access all affect actual use. For retrofit projects involving existing equipment, site photos, interface dimensions, or simple drawings should be provided to reduce modifications caused by mechanical incompatibility.

The third type of omission is failing to define acceptance criteria. The procurement contract or technical agreement may specify the measuring range, output, accuracy, protection rating, power supply, installation interface, and necessary testing requirements. For critical control points, it is recommended to also define power-on testing, zero-point checks, full-scale verification, and signal commissioning methods, so that product delivery, on-site installation, and subsequent acceptance have a consistent basis.

Selection and Service Recommendations for Shenghongchuang Level Measurement and Control Products

As the entity responsible for brand operation, sales, and technical services, Xi'an Shenghongchuang Instruments & Meters Co., Ltd., supported by the production base of Shaanxi Qinkong Sensor Technology Co., Ltd., provides supporting products including pressure, level, differential pressure, temperature and humidity, flow, and intelligent digital display control instruments for industrial automation measurement and control requirements. The dual-base operating model can cover product communication, technical confirmation, production and manufacturing, accuracy calibration, and after-sales service.

For temperature- and pressure-compensated level measurement requirements, selection should begin with on-site issues rather than first locking in a particular model. Technical personnel need to determine whether level measurement is continuous measurement or limit control, whether the site is open or sealed, and whether factors such as high temperature, high pressure, corrosion, vibration, and strong electromagnetic interference are present, before determining the sensor structure, compensation method, and signal interface.

For industries such as machinery manufacturing, chemical energy, metallurgy and building materials, logistics and warehousing, environmental monitoring, intelligent equipment, and automated production lines, sensors are often the basic input devices of control systems. Selecting a supplier with complete quality control, calibration and testing capabilities, and non-standard support capabilities helps improve project implementation efficiency and maintains consistency for subsequent equipment expansion, spare part replacement, and system upgrades.

Information That Can Be Prepared Before Obtaining an Accurate Quotation

To obtain a more accurate price for Xi'an Shenghongchuang temperature- and pressure-compensated level sensors, it is recommended to first organize the level measuring range, such as 0 to 3 m, 0 to 8 m, or 0 to 15 m, while also specifying the vessel type, medium name, medium temperature, operating pressure, and maximum pressure. For sites with level fluctuations, foam, sediment, or agitators, these conditions should also be described accurately.

Next, electrical conditions should be confirmed, including 24VDC power supply, 4-20mA output, RS485 communication, control cabinet input type, and on-site cable distance. If the sensor needs to be used with a PLC, DCS, frequency converter, or intelligent digital display meter, providing the existing equipment model or interface requirements can reduce issues such as communication incompatibility and measuring range conversion errors.

Finally, the procurement quantity, expected delivery time, whether on-site guidance is required, and whether it is a retrofit project should be specified. Quotation logic differs for single-unit samples, batch supply, and long-term stocking. For non-standard projects, confirming sample validation and batch delivery standards in advance helps establish a clearer procurement plan between performance, delivery time, and cost. Please submit site parameters, installation photos, and existing interface dimensions to Shenghongchuang technical personnel to obtain configuration recommendations and a formal quotation for the applicable operating conditions.

Submit