The intelligent electromagnetic flowmeter consists of two parts: a sensor and a converter. It works based on Faraday's law of electromagnetic induction and is used to measure the volumetric flow of conductive liquids with conductivity greater than 5μS/cm. It is an inductive instrument for measuring the volumetric flow of conductive media. In addition to measuring the volumetric flow of general conductive liquids, it can also be used to measure the volumetric flow of highly corrosive liquids such as strong acids and strong alkalis, as well as uniform liquid-solid two-phase suspensions such as slurry, ore pulp, and paper pulp. It is widely used in flow measurement in petroleum, chemical, metallurgy, light textile, papermaking, environmental protection, food and other industrial sectors, as well as in municipal administration, water conservancy construction, river dredging and other fields.

II. Working Principle 

According to Faraday's principle of electromagnetic induction, a pair of detecting electrodes is installed on the pipe wall perpendicular to the axis of the measuring tube and the magnetic field lines. When the conductive liquid moves along the axis of the measuring tube, the conductive liquid cuts the magnetic field lines to generate an induced electromotive force. This induced electromotive force is detected by the two detecting electrodes, and its value is directly proportional to the flow rate. Its value is:
   E=KBVD 
   Where:
   E－induced electromotive force;
   K－coefficient related to magnetic field distribution and axial length;
   B－magnetic induction intensity;
   V－average velocity of conductive liquid;
   D－distance between electrodes; (inner diameter of measuring tube)
   The sensor uses the induced electromotive force E as the flow signal and transmits it to the converter. After amplification, conversion, filtering, and a series of digital processing, the instantaneous flow and cumulative flow are displayed with a backlit dot-matrix LCD. The converter has 4～20mA output, alarm output, and frequency output, and is equipped with communication interfaces such as RS－485, and supports HART and MODBUS protocols.

III. Instrument Features

Fully digital processing, strong anti-interference capability, reliable measurement, high accuracy, and a flow measurement range of up to 150：1;
Ultra-low EMI switching power supply, suitable for a wide range of power supply voltage variations, with good resistance to EMI;
Using a 16-bit embedded microprocessor, with fast operation speed, high accuracy, and programmable frequency low-frequency rectangular wave excitation,  improving the stability of flow measurement and reducing power consumption;
Using SMD components and surface mount (SMT) technology, with high circuit reliability;
No movable parts or flow-blocking parts inside the pipeline, resulting in almost no additional pressure loss during measurement;
The range can be modified online on site according to the user's actual needs;
The measurement results are independent of physical parameters such as flow distribution, fluid pressure, temperature, density, and viscosity;
High-clarity backlit LCD display, full Chinese menu operation, convenient to use, simple to operate, easy to learn and understand;
With digital communication signal outputs such as RS485, RS232, Hart and Modbus; (optional)

With self-check and self-diagnosis functions;
Hourly total recording function, recording the total flow by hour, suitable for time-of-use metering systems (optional);
Internally equipped with three accumulators that can separately display forward cumulative volume, reverse cumulative volume, and differential accumulated volume. It is internally equipped with a power-failure clock and can record 16 power outage times. (optional);
 Infrared handheld operator, 115KHZ communication rate, remotely operates all functions of the converter without contact over a long distance (optional).

Since its establishment, Xi'an Shenghongchuang Instrument Co., Ltd. has mainly been engaged in the R&D and production of pressure, level, temperature, differential pressure, digital display, weighing, and flow instruments. Its main products include Swiss metallux ceramic piezoresistive sensors and self-developed ceramic capacitive pressure sensors. Diffused silicon, ceramic piezoresistive, strain gauge, metal capacitive, ceramic capacitive pressure transmitters, remote pressure transmitters, high-temperature pressure transmitters, flush diaphragm pressure transmitters, anti-corrosion pressure transmitters, integrated/split level transmitters, anti-corrosion level transmitters, lightning-protection level transmitters, high-temperature guided-pressure liquid level transmitters, rigid rod level transmitters, flange level transmitters, air pressure transmitters, metal capacitive differential pressure transmitters, diffused silicon differential pressure transmitters, pressure controllers, thermocouples/RTDs, temperature transmitters, ultrasonic level meters

Precautions 1.All supplied products are provided with product certificates and instruction manuals, including product numbers, technical parameters, wiring methods, factory dates, etc. Please carefully check them to avoid misuse.2.Wiring should be carried out strictly in accordance with our company's instructions for use.3.This product is a precision instrument. Random disassembly, collision, dropping, or poking the sensor with sharp tools is prohibited.4.The transmitter can work immediately after power-on, but the output will stabilize after preheating for 30 minutes.5.If any abnormality is found during use, the power should be turned off, use should be stopped, and inspection should be carried out, or contact our company's technical department directly.6.During transportation and storage, restore the original packaging and store it in a cool, dry, and ventilated warehouse.7.The quality warranty period is 12 months (damage caused by improper use such as pressure overload and incorrect wiring is not covered by the quality warranty).8.Special products are customized products, do not participate in 7-day no-reason return, customized products have a delivery time, and are non-returnable and non-exchangeable.