The intelligent electromagnetic flowmeter consists of two parts: a sensor and a converter. It operates based on Faraday's law of electromagnetic induction and is used to measure the volumetric flow of conductive liquids with conductivity greater than 5μS/cm, making it an inductive instrument for measuring the volumetric flow of conductive media. In addition to measuring the volumetric flow of general conductive liquids, it can also be used to measure the volumetric flow of highly corrosive liquids such as strong acids and alkalis, as well as uniform liquid-solid two-phase suspensions such as slurry, ore pulp, and paper pulp. It is widely used in flow measurement in petroleum, chemical, metallurgical, light textile, papermaking, environmental protection, food and other industrial sectors, as well as in municipal administration, water conservancy construction, river dredging and other fields.

II.Working Principle 

According to Faraday's principle of electromagnetic induction, a pair of detection electrodes is installed on the pipe wall perpendicular to the axis of the measuring tube and the magnetic field lines. When the conductive liquid moves along the axis of the measuring tube, the conductive liquid cuts the magnetic field lines and generates an induced electromotive force. This induced electromotive force is detected by the two detection electrodes, and its value is directly proportional to the flow rate. The value is:
   E=KBVD 
   Where:
   E– induced electromotive force;
   K– coefficient related to magnetic field distribution and axial length;
   B– magnetic induction intensity;
   V– average velocity of conductive liquid;
   D– distance between electrodes; (inner diameter of the measuring tube)
   The sensor uses the induced electromotive force E as the flow signal and transmits it to the converter. After amplification, conversion, filtering, and a series of digital processing steps, the instantaneous flow and cumulative flow are displayed on a backlit dot-matrix liquid crystal display. The converter has 4～20mA output, alarm output, and frequency output, and is equipped with communication interfaces such as RS－485, and supports HART and MODBUS protocols.

III.Instrument Features

Full digital processing, strong anti-interference capability, reliable measurement, high accuracy, and a flow measurement range up to 150:1;
Ultra-low EMI switching power supply, suitable for a wide range of power supply voltage variations, with excellent EMI resistance;
Adopts a 16-bit embedded microprocessor, featuring fast computing speed and high accuracy. The programmable frequency low-frequency rectangular wave excitation improves the stability of flow measurement and reduces power consumption;
Adopts SMD components and surface mount (SMT) technology for high circuit reliability;
No moving parts or flow-blocking components inside the pipeline, resulting in almost no additional pressure loss during measurement;
The range can be modified online on site according to actual user requirements;
The measurement results are independent of physical parameters such as flow distribution, fluid pressure, temperature, density, and viscosity;
High-definition backlit LCD display, full Chinese menu operation, convenient to use, simple to operate, and easy to learn and understand;
Provides digital communication signal outputs such as RS485, RS232, Hart and Modbus; (optional)

With self-check and self-diagnosis functions;
Hourly total recording function, recording the total flow by hour, suitable for time-of-use metering systems (optional);
Internally equipped with three integrators to separately display forward cumulative flow, reverse cumulative flow, and differential cumulative flow. It has a built-in power-off clock and can record 16 power-off times. (optional);
 Infrared handheld operator, 115KHZ communication rate, remote non-contact operation of all converter functions (optional).

Since its establishment, Xi'an Shenghongchuang Instrument Co., Ltd. has mainly been engaged in the R&D and production of pressure, level, temperature, differential pressure, digital display, weighing, and flow instruments.Main products include Swiss metallux ceramic piezoresistive sensors, and self-developed ceramic capacitive pressure sensors. Diffused silicon, ceramic piezoresistive, strain gauge, metal capacitive, ceramic capacitive pressure transmitters, remote pressure transmitters, high-temperature pressure transmitters, flush diaphragm pressure transmitters, anti-corrosion pressure transmitters, integrated/split level transmitters, anti-corrosion level transmitters, lightning-proof level transmitters, high-temperature guided-pressure level transmitters, rigid rod level transmitters, flange level transmitters, air pressure transmitters, metal capacitive differential pressure transmitters, diffused silicon differential pressure transmitters, pressure controllers, thermocouples/RTDs, temperature transmitters, ultrasonic level meters

Precautions 1.All supplied products are accompanied by a product certificate and instruction manual, including product number, technical parameters, wiring, date of manufacture, etc. Please carefully check them to avoid misuse.2.Wiring should be carried out strictly in accordance with our company's instructions for use.3.This product is a precision instrument. Arbitrary disassembly, collision, dropping, or poking the sensor with sharp tools is prohibited.4.The transmitter can work immediately after power-on, but the output becomes stable after preheating for 30 minutes.5.If any abnormality is found during use, the power supply should be turned off, use should be stopped, and inspection should be carried out, or contact our company's technical department directly.6.During transportation and storage, restore the original packaging and store it in a cool, dry, and ventilated warehouse.7.The quality guarantee period is 12 months (damage caused by improper use such as pressure overload and incorrect wiring is not covered by the quality guarantee).8.Special products are customized products, do not participate in 7-day no-reason return, custom products have delivery lead times, no return and no exchange.