Split-type ultrasonic level meter, four-wire system,with built-in4-20mAandRS485interface diagnostic module,two-line LCD display, temperature compensation available, with overvoltage and overcurrent protection, automatic interference suppression and other features,welcome to purchase.

Split-type ultrasonic level meter,features of the English four-wire split-type ultrasonic water level meter:

        1, usingABShousing, split-type installation;protection ratingIP65;

        2, with the help of a two-line LCD display and keypad, on-site operation can be carried out.

        3, with built-in4-20mAcurrentIRS485interface diagnostic module.

        4, all input and output wires have overvoltage and overcurrent protection.

        5,ABSengineering plastic housing, protection ratingIP65.

        6, an internal integrated temperature sensor performs real-time temperature compensation for the speed of sound.

        7, automatically detects on-site electrical interference and suppresses it.

        8, four response speeds are available for selection, and even if the liquid surface fluctuates violently, the average liquid level can still be read accurately.

        9, non-contact measurement, long service life.

 *FS: full scale. *Standard conditions: temperature20℃ ± 5℃, humidity45%～75%, no wind around, in air at1bar.

        *When the ambient temperature is-40℃～- 20℃, the LCD cannot display, and the instrument works slowly. When the temperature is higher than-20℃, instrument operation and LCD display return to normal.

*FS: full scale. *Standard conditions: temperature20℃ ± 5℃, humidity45%～75%, no wind around, in air at1bar.

        *When the ambient temperature is-40℃～- 20℃, the LCD cannot display, and the instrument works slowly. When the temperature is higher than-20℃, instrument operation and LCD display return to normal.

Selection and installation notes for ultrasonic water level meter:

      1, the ultrasonic level meter comes with a plastic nut. Flanges of various specifications can be customized according to user requirements.

      2, in order to prevent bracket vibration, the bracket should be thick and sturdy. Vibration reduction measures should be considered at the fixing point between the bracket and the tank wall.

      3, the recommended bracket arm length is30-50cm.

Since its establishment, Xi'an Shenghong Chuang Instrument Co., Ltd. has mainly been engaged in the R&D and production of pressure, level, temperature, differential pressure, digital display, weighing, and flow instruments.Main products, Swissmetallux ceramic piezoresistive sensors, self-developed ceramic capacitive pressure sensors. Diffused silicon, ceramic piezoresistive, strain gauge, metal capacitive, ceramic capacitive pressure transmitters remote pressure transmitters high-temperature pressure transmitters flush diaphragm pressure transmitters anti-corrosion pressure transmitters integrated/split level transmitters anti-corrosion level transmitters lightning-protection level transmitters high-temperature guided-pressure level transmitters rigid rod level transmitters flange level transmitters air pressure transmitters metal capacitive differential pressure transmitters diffused silicon differential pressure transmitters pressure controllers thermocouples/RTDs temperature transmitters ultrasonic level meters

Precautions 1.All supplied products are provided with product certificates and instruction manuals, including product numbers, technical parameters, wiring, factory date, etc. Please check carefully to avoid incorrect use.2.Wiring should be carried out strictly in accordance with our company's instructions for use.3.This product is a precision instrument. Random disassembly, collision, dropping, or poking the sensor with sharp tools is prohibited.4.The transmitter can work immediately after power-on, but the output becomes stable after preheating for 30 minutes.5.If any abnormality is found during use, the power supply should be turned off, use should be stopped, inspection should be carried out, or contact our company's technical department directly.6.During transportation and storage, restore the original packaging and store in a cool, dry, and ventilated warehouse.7.The quality guarantee period is 12 months (damage caused by improper use such as pressure overload and incorrect wiring is not covered by the quality guarantee).8.Special products are customized products, do not participate in the 7-day no-reason return policy, customized products have a lead time, and are non-returnable and non-exchangeable.