The capacitive intelligent pressure/differential pressure/level transmitter is a high-precision intelligent instrument product independently researched, developed, and manufactured by our company on the basis of many years of scientific research and practical experience.

The intelligent pressure/differential pressure/level transmitter is a new generation of intelligent transmitter manufactured by adopting a sensor core produced with ROSEMOUNT technology and integrating the advanced digital technology developed by our company. In principle, it uses a direct digital capacitance circuit to replace the analog signal amplification circuit and A/D conversion circuit, and applies digital compensation technology to compensate temperature and static pressure, thereby improving measurement accuracy and reducing temperature drift. The complete transmitter features small size, high reliability, and good long-term stability. This product offers extremely high cost performance, making it a mainstream product in the transmitter market.

This intelligent pressure/differential pressure/level transmitter features a novel design principle, a complete range of varieties and specifications, convenient installation and use, and safety explosion-proof performance. It is especially renowned for high accuracy, small size, light weight, convenient adjustment, good long-term stability, strong one-way overload protection capability, and suitability for use in harsh environments. Therefore, it enjoys a very high reputation in both domestic and international markets. This series of 0.1 grade capacitive intelligent transmitters includes pressure, differential pressure, absolute pressure, remote transmission, level, and many other types, and is equipped with corresponding optional products. It can be widely used in electric power, metallurgy, petrochemical, instrument processing, and other industries, and complies with the requirements of the “IEC” standards promoted in China.

Product Features

·The use of a microprocessor provides greater flexibility and enhanced functions;

·Strong self-diagnostic capability;

·Wide measuring range coverage: 0～0.2kPa…10MPa;

·Accuracy class 0.1, turndown ratio better than 40：1;

·Zero point and span adjustment do not affect each other;

·Both remote and local adjustment of span and zero point are available;

·Two-wire system, compliant with HART protocol, capable of digital communication with ROSEMOUNT275 and MS-H376 handheld communicators without interrupting analog output;

·The sensor has built-in non-volatile memory;

·Good stability, high accuracy, adjustable damping, and strong one-way overload resistance;

·No mechanical moving parts, low maintenance workload, sturdy and vibration-resistant;

·All universal parts; interchange of the sensor and electronic circuit board does not affect transmitter performance, making maintenance more convenient;

·Optional diaphragm materials for parts in contact with the medium, explosion-proof housing structure;

·Industry-proven superiority and reliability.

Performance Parameters

Technical Performance

Applicable media: liquid, gas, or steam

Measuring range: Range 3  0-0.2～6.0kPa

Range 4  0-6.0～40.0kPa

Range 5  0-40.0～200kPa

Range 6  0-0.16～1.0MPa

Range 7  0-0.4～2.0MPa

Range 8  0-1.6～10MPa

Output signal: linear output: 4~20mA output superimposed with HART protocol digital signal（two-wire system）；

Square root output: within 1.0%~100% input pressure, the output has a square root relationship with differential pressure; within 0%~0.1%, the output has a segmented linear relationship with differential pressure; there is no abrupt change between 4~20mADC output, superimposed with HART? protocol digital signal(two-wire system), and users can choose linear output or square root output according to field conditions.

Power      supply: externally supplied 24V DC，（power supply range 14.5V~45V）

Load characteristics: maximum allowable load resistance in the load resistor loop Rmax=(E-10.5)/0.0236(Ω)

Installation in hazardous locations: flameproof type Exd Ⅱ CT6；

               intrinsically safe type Exia Ⅱ CT6；

Load characteristics: after positive or negative shift, the upper and lower range limits must not exceed the range limits. At the minimum range, the maximum positive shift is 0.975URL; the maximum negative shift is -URL. Under square root output, the positive and negative shift can be adjusted and calibrated to 10% of the flow range.

Temperature range: medium temperature　　　　-40～100℃

  　      storage temperature　　　　-40～100℃

    　    complete unit operating temperature　　-40～85℃

Relative humidity: 0～100%

Overpressure limit: applying 0（absolute pressure）~13.76MPa pressure to either side of the transmitter will not damage the transmitter; the flange can withstand 68.9MPa pressure; normal operating pressure should be between 3.45kPa（absolute pressure） and the upper limit of the transmitter range.

Volume change: less than 0.16cm3

Damping: adjustable time constant between 0.2～32.0s.

Start-up time: 3s, no preheating required.

Performance indicators:

   （under standard test conditions with no shift, 316 stainless steel isolation diaphragm, and other standard test conditions.）

    Turndown ratio: 40：1

    Accuracy: for ranges 3、4、5

　　　             when the turndown ratio is 1：1 to 10：1, it is ±0.1% of the calibrated span,

                      when the turndown ratio is 10：1 to 40：1, it is ±0.05（1+0.1URL/span）% span,

                for ranges 6、7、8

                      when the turndown ratio is 1：1 to 10：1, it is ±0.15% of the calibrated span,

                      when the turndown ratio is 10：1 to 40：1, it is ±0.075（1+0.1URL/span）% span,

    Stability: six-month error is ±0.15% of the maximum range;

    Temperature effect: for ranges 4、5、6、7、8

                   zero error is ±0.25% of the maximum range/55℃.

　　　　　    total error including span and zero point is ±0.5% of the maximum range/55℃.

　　　　Note: for range 3, the temperature error must be doubled.

    Overpressure effect: after applying pressure of 140kgf/cm2, the error is ±0.25% of the maximum range.

    Static pressure effect: under linear output, zero error: after applying static pressure of 140kgf/cm2, the zero error for ranges 4、5 is ±0.25% of the maximum range, and the zero error for ranges 3、6、7、8 is ±0.5% of the maximum range.

　 Span error: for ranges 4、5、6、7、8, the error is -1±0.25%/6.89MPa of the maximum range; for range 3, the error is -1.5±0.25%. This is a system error and can be eliminated by calibrating according to the actual static pressure before installation.

    Power supply effect: less than 0.005%/V of output range

    Vibration effect: on any axis, at a frequency of 200Hz, the induced error is ±0.05%/g of the maximum range.

    Load effect: as long as the voltage input to the transmitter is higher than 14.5V, there is no load effect within the load operating area.

    Installation position effect: the maximum zero shift error generated is no greater than 0.25 kPa, but it can be corrected and has no effect on the range;

Rotation of the measuring body relative to the flange has no effect.

    Electromagnetic radiation: complies with IEC801 standard

External Structure

 Structural materials:

        Isolation diaphragm and vent/drain valve: 316 stainless steel, Hastelloy C, Monel;

　　  Flange and joint: 316 stainless steel, Hastelloy C, Monel;

        “O” ring（in contact with the measuring medium）: fluororubber, nitrile rubber, ethylene-propylene;

　　  Filling liquid: silicone oil;

　　  Bolts: carbon steel zinc plated、1Cr18Ni9、0Cr17Ni4CuNb、42CrMo;

        Electrical housing: low-copper aluminum alloy;

        Coating: polyester epoxy resin;

        Pressure connection: for ranges 3、4、5, the thread of the two-flange connection is 1/4-18NPT with a center hole distance of 54mm;

　　　　　　　  Joint 1/2-14NPT or M20X1.5 male thread; when equipped with conical sealing joint, the center distance is 50.8、54、57.2mm;

        Weight:   3.5kg（excluding options）

Since its establishment, Xi'an Shenghongchuang Instrument Co., Ltd. has mainly been engaged in the R&D and production of pressure, level, temperature, differential pressure, digital display, weighing, and flow instruments. Main products include Swiss metallux ceramic piezoresistive sensors, self-developed ceramic capacitive pressure sensors, diffused silicon, ceramic piezoresistive, strain gauge, metal capacitive, ceramic capacitive pressure transmitters, remote pressure transmitters, high-temperature pressure transmitters, flush diaphragm pressure transmitters, anti-corrosion pressure transmitters, integrated/split level transmitters, anti-corrosion level transmitters, lightning-proof level transmitters, high-temperature guided pressure level transmitters, rigid rod level transmitters, flange level transmitters, air pressure transmitters, metal capacitive differential pressure transmitters, diffused silicon differential pressure transmitters, pressure controllers, thermocouple/RTD temperature transmitters, and ultrasonic level meters

Precautions 1.All supplied products are provided with a product certificate of conformity and instruction manual, including product number, technical parameters, wiring, date of manufacture, etc. Please carefully check them to avoid misuse.2.Wiring shall be carried out strictly in accordance with our company's instructions for use.3.This product is a precision instrument. Random disassembly, collision, dropping, or poking the sensor with sharp tools is prohibited.4.The transmitter can work immediately after power-on, but the output becomes stable after preheating for 30 minutes.5.If any abnormality is found during use, the power supply should be turned off, use should be stopped, and inspection should be carried out, or contact our company's technical department directly.6.During transportation and storage, restore the original packaging and store it in a cool, dry, and ventilated warehouse.7.The quality warranty period is 12 months（damage caused by improper use such as pressure overload and incorrect wiring is not covered by the quality warranty）.8.Special products are customized products, do not participate in the 7-day no-reason return policy, and customized products have a delivery lead time, with no return or exchange.