The capacitive intelligent pressure/differential pressure/level transmitter is a high-precision intelligent instrument product independently researched, developed, and manufactured by our company on the basis of many years of scientific research and practical experience.

The intelligent pressure/differential pressure/level transmitter is a new generation of intelligent transmitter produced by adopting a sensor core manufactured with ROSEMOUNT technology and integrating the advanced digital technology developed by our company. In principle, it uses a direct digital capacitance circuit to replace the analog signal amplification circuit and A/D conversion circuit, and applies digital compensation technology to compensate temperature static pressure, thereby improving measurement accuracy and reducing temperature drift. The complete transmitter features small size, high reliability, and good long-term stability. This product offers extremely high cost performance and has therefore become a mainstream product in the transmitter market.

This intelligent pressure/differential pressure/level transmitter features a novel design principle, a full range of models and specifications, convenient installation and use, and safety explosion-proof performance. It is especially renowned for high accuracy, small size, light weight, convenient adjustment, good long-term stability, strong one-way overload protection capability, and suitability for use in harsh environments. Therefore, it enjoys a high reputation in both domestic and international markets. This series of 0.1-grade capacitive intelligent transmitters includes pressure, differential pressure, absolute pressure, remote transmission, level, and other models, and is equipped with corresponding optional products. It can be widely used in industries such as electric power, metallurgy, petrochemical, and instrument processing, and complies with the “IEC” standard requirements promoted in China.

Product Features

·The use of a microprocessor increases flexibility and enhances functions;

·Strong self-diagnostic capability;

·Wide range coverage 0～0.2kPa…10MPa;

·Accuracy up to 0.1 grade, with a turndown ratio better than 40：1;

·Zero point and span adjustment do not affect each other;

·Both remote and local span and zero point are adjustable;

·Two-wire system, compliant with HART protocol, capable of digital communication with ROSEMOUNT275 and MS-H376 handheld communicators without interrupting analog output;

·The sensor is equipped with non-volatile memory;

·Good stability, high accuracy, adjustable damping, and strong resistance to one-way overload;

·No mechanical transmission parts, low maintenance workload, sturdy and vibration-resistant;

·All universal parts; interchangeability between the sensor and electronic circuit board does not affect transmitter performance, making maintenance more convenient;

·Optional diaphragm materials for contact media, explosion-proof housing structure;

·Industry-proven superiority and reliability.

Performance Parameters

Technical Performance

Applicable media: liquid, gas, or steam

Measurement range: Range 3  0-0.2～6.0kPa

Range 4  0-6.0～40.0kPa

Range 5  0-40.0～200kPa

Range 6  0-0.16～1.0MPa

Range 7  0-0.4～2.0MPa

Range 8  0-1.6～10MPa

Output signal: linear output: 4~20mA output superimposed with HART protocol digital signal（two-wire system）；

Square root output: between 1.0%~100% of input pressure, the output has a square root relationship with differential pressure; between 0%~0.1%, the output has a segmented linear relationship with differential pressure; there is no jump within 4~20mADC output, superimposed with HART? protocol digital signal(two-wire system), and users can select linear output or square root output according to on-site conditions.

Power      supply: external 24V DC power supply, （power supply range 14.5V~45V）

Load characteristics: the maximum allowable load resistance in the load resistor circuit Rmax=(E-10.5)/0.0236(Ω)

Installation in hazardous locations: flameproof type Exd Ⅱ CT6；

                intrinsically safe type Exia Ⅱ CT6；

Load characteristics: after positive and negative migration, the upper and lower range limits must not exceed the range limits. At the minimum range, the maximum positive migration is 0.975URL; the maximum negative migration is -URL. With square root output, positive and negative migration can calibrate 10% of the flow range.

Temperature range: medium temperature　　　　-40～100℃

  　      storage temperature　　　　-40～100℃

    　    complete unit operating temperature　　-40～85℃

Relative humidity: 0～100%

Overpressure limit: applying 0（absolute pressure）~13.76MPa pressure to either side of the transmitter will not damage the transmitter; the flange can withstand 68.9MPa pressure; normal operating pressure should be between 3.45kPa（absolute pressure） and the upper limit of the transmitter range.

Volume change: less than 0.16cm3

Damping: the time constant is adjustable between 0.2～32.0s.

Startup time: 3s, no preheating required.

Performance indicators:

   （Under standard test conditions with no migration, 316 stainless steel isolation diaphragm, and other standard test conditions.）

    Range ratio: 40：1

    Accuracy: ranges 3、4、5

　　　             when the range ratio is 1：1 to 10：1, it is ±0.1% of the calibrated range,

                      when the range ratio is 10：1 to 40：1, it is ±0.05（1+0.1URL/range）% range,

                ranges 6、7、8

                      when the range ratio is 1：1 to 10：1, it is ±0.15% of the calibrated range,

                      when the range ratio is 10：1 to 40：1, it is ±0.075（1+0.1URL/range）% range,

    Stability: six-month error is ±0.15% of the maximum range;

    Temperature effect: ranges 4、5、6、7、8

                   zero error is ±0.25%/55℃ of the maximum range.

　　　　    the total error including range and zero point is ±0.5%/55℃ of the maximum range.

　　　　Note: for range 3, the temperature error should be doubled.

    Overpressure effect: after applying pressure of 140kgf/cm2, the error is ±0.25% of the maximum range.

    Static pressure effect: with linear output, zero error: after applying static pressure of 140kgf/cm2, the zero error of ranges 4、5 is ±0.25% of the maximum range, and the zero error of ranges 3、6、7、8 is ±0.5% of the maximum range.

　 Range error: the errors of ranges 4、5、6、7、8 are -1±0.25%/6.89MPa of the maximum range, and the error of range 3 is -1.5±0.25%. This is a system error and can be eliminated by calibrating according to the actual static pressure before installation.

    Power supply effect: less than 0.005%/V of output range

    Vibration effect: on any axis, at a frequency of 200Hz, the resulting error is ±0.05%/g of the maximum range.

    Load effect: as long as the input voltage to the transmitter is higher than 14.5V, there is no load effect within the load operating area.

    Installation position effect: a zero error not greater than 0.25 kPa may be generated at most, but it can be corrected, with no effect on the range;

The rotation of the measuring body relative to the flange has no effect.

    Electromagnetic radiation: complies with IEC801 standard

Appearance Structure

 Structural materials:

        Isolation diaphragm and vent/drain valve: 316 stainless steel, Hastelloy C, Monel;

　　  Flange and joint: 316 stainless steel, Hastelloy C, Monel;

        “O” ring （in contact with measuring medium）: fluororubber, nitrile rubber, ethylene-propylene;

　　  Filling fluid: silicone oil;

　　  Bolt: carbon steel galvanized、1Cr18Ni9、0Cr17Ni4CuNb、42CrMo;

        Electrical housing: low-copper aluminum alloy;

        Coating: epoxy resin;

        Pressure connection: for ranges 3、4、5, the center hole distance of the two-flange connection thread 1/4-18NPT is 54mm;

　　　　　　　  Joint 1/2-14NPT or M20X1.5 male thread; with ball-cone sealing and joint, the center distance is 50.8, 54, 57.2mm;

        Weight:   3.5kg（excluding options）

Since its establishment, Xi'an Shenghongchuang Instrument Co., Ltd. has been mainly engaged in the R&D and production of pressure, level, temperature, differential pressure, digital display, weighing, and flow instruments. Its main products include Swiss metallux ceramic piezoresistive sensors and self-developed ceramic capacitive pressure sensors. Diffused silicon, ceramic piezoresistive, strain gauge, metal capacitive, ceramic capacitive pressure transmitters, remote pressure transmitters, high-temperature pressure transmitters, flush diaphragm pressure transmitters, anti-corrosion pressure transmitters, integrated/split level transmitters, anti-corrosion level transmitters, lightning-protection level transmitters, high-temperature guided-pressure level transmitters, rigid rod level transmitters, flange level transmitters, air pressure transmitters, metal capacitive differential pressure transmitters, diffused silicon differential pressure transmitters, pressure controllers, thermocouple/RTD temperature transmitters, ultrasonic level meters

Precautions 1.All supplied products are accompanied by a product certificate and instruction manual, including product number, technical parameters, wiring, date of manufacture, etc. Please check carefully to avoid misuse.2.Wiring should be carried out strictly in accordance with our company's instructions for use.3.This product is a precision instrument. Random disassembly, collision, dropping, or poking the sensor with sharp tools is prohibited.4.The transmitter can work immediately after power-on, but the output will stabilize after 30 minutes of preheating.5.If any abnormality is found during use, turn off the power, stop using it, inspect it, or directly contact our company's technical department.6.During transportation and storage, restore the original packaging and store it in a cool, dry, and ventilated warehouse.7.The quality warranty period is 12 months （damage caused by improper use such as pressure overload or incorrect wiring is not covered by the quality warranty）.8.Special products are customized products, do not participate in 7-day no-reason return, customized products have a lead time, and are not returnable or exchangeable.