The capacitive intelligent pressure/differential pressure/level transmitter is a high-precision intelligent instrument product independently researched, developed, and manufactured by our company based on many years of scientific research and practical experience.

The intelligent pressure/differential pressure/level transmitter is a new-generation intelligent transmitter manufactured using a sensor core produced with ROSEMOUNT technology, combined with advanced digital technology developed by our company. In principle, it uses a direct digital capacitance circuit to replace the analog signal amplification circuit and A/D conversion circuit, and applies digital compensation technology to compensate for temperature and static pressure, thereby improving measurement accuracy and reducing temperature drift. The complete transmitter features small size, high reliability, and good long-term stability. This product offers extremely high cost performance, making it a mainstream product in the transmitter market.

This intelligent pressure/differential pressure/level transmitter features a novel design principle, complete varieties and specifications, convenient installation and use, safety, and explosion protection. It is especially renowned for high accuracy, small size, light weight, convenient adjustment, good long-term stability, strong unidirectional overload protection capability, and suitability for use in harsh environments. Therefore, it enjoys a very high reputation in domestic and overseas markets. This series of 0.1-grade capacitive intelligent transmitters includes pressure, differential pressure, absolute pressure, remote transmission, level, and many other types, and is equipped with corresponding optional products. It can be widely used in industries such as electric power, metallurgy, petrochemical, and instrument processing, and complies with the "IEC" standard requirements promoted in China.

Product Features

·The use of a microprocessor provides greater flexibility and enhanced functions;

·Strong self-diagnostic capability;

·Wide measuring range coverage 0～0.2kPa…10MPa;

·Accuracy up to 0.1 grade, with turndown ratio better than 40：1;

·Zero point and span adjustment do not affect each other;

·Both remote and local adjustment of range and zero point are available;

·Two-wire system, compliant with HART protocol, enabling digital communication with ROSEMOUNT275 and MS-H376 handheld communicators without interrupting analog output;

·The sensor has built-in non-volatile memory;

·Good stability, high accuracy, adjustable damping, and strong resistance to unidirectional overload;

·No mechanical transmission parts, low maintenance workload, sturdy and vibration-resistant;

·All universal parts, and interchange of the sensor and electronic circuit board does not affect transmitter performance, making maintenance more convenient;

·Optional diaphragm materials for parts in contact with the measured medium, explosion-proof housing structure;

·Industry-proven superiority and reliability.

Performance Parameters

Technical Performance

Applicable media: liquid, gas, or steam

Measurement range: Range 3  0-0.2～6.0kPa

Range 4  0-6.0～40.0kPa

Range 5  0-40.0～200kPa

Range 6  0-0.16～1.0MPa

Range 7  0-0.4～2.0MPa

Range 8  0-1.6～10MPa

Output signal: linear output: 4~20mA output superimposed with HART protocol digital signal（two-wire system）；

Square root output: when the input pressure is between 1.0%~100%, the output has a square root relationship with differential pressure; between 0%~0.1%, the output has a segmented linear relationship with differential pressure; there is no jump change between 4~20mADC output, superimposed with HART? protocol digital signal(two-wire system), and users can select linear output or square root output according to on-site conditions.

Power      supply: externally supplied 24V DC, （power supply range 14.5V~45V）

Load characteristics: the maximum allowable load resistance in the load resistor circuit is Rmax=(E-10.5)/0.0236(Ω)

Installation in hazardous locations: flameproof type Exd Ⅱ CT6；

                intrinsically safe type Exia Ⅱ CT6；

Load characteristics: after positive and negative shift, the upper and lower limits of the range shall not exceed the limits of the range. At the minimum range, the maximum positive shift is 0.975URL; the maximum negative shift is -URL. During square root output, positive and negative shift can be adjusted and calibrated to 10% of the flow range.

Temperature range: medium temperature　　　　-40～100℃

  　      storage temperature　　　　-40～100℃

    　    complete unit operating temperature　　-40～85℃

Relative humidity: 0～100%

Overpressure limit: applying 0（absolute pressure）~13.76MPa pressure to either side of the transmitter will not damage the transmitter; the flange can withstand 68.9MPa pressure; the normal operating pressure should be within 3.45kPa（absolute pressure） to the upper limit of the transmitter range.

Volume change: less than 0.16cm3

Damping: the time constant is adjustable between 0.2～32.0s.

Startup time: 3s, no preheating required.

Performance indicators:

    （Under standard test conditions with no shift, 316 stainless steel isolation diaphragm, and other standard conditions.）

    Turndown ratio: 40：1

    Accuracy: for ranges 3, 4, 5

　　　              when the turndown ratio is 1：1 to 10：1, it is ±0.1% of the calibrated range,

                      when the turndown ratio is 10：1 to 40：1, it is ±0.05（1+0.1URL/range）% range,

                for ranges 6, 7, 8

                      when the turndown ratio is 1：1 to 10：1, it is ±0.15% of the calibrated range,

                      when the turndown ratio is 10：1 to 40：1, it is ±0.075（1+0.1URL/range）% range,

    Stability: six-month error is ±0.15% of the maximum range；

    Temperature effect: for ranges 4, 5, 6, 7, 8

                    zero point error is ±0.25%/55℃ of the maximum range.

　　　　　    including the total error of range and zero point, it is ±0.5%/55℃ of the maximum range.

　　　　Note: for range 3, the temperature error should be doubled.

    Overpressure effect: after applying pressure of 140kgf/cm2, the error is ±0.25% of the maximum range span.

    Static pressure effect: during linear output, zero point error: after applying static pressure of 140kgf/cm2, the zero point error for ranges 4 and 5 is ±0.25% of the maximum range span, and the zero point error for ranges 3, 6, 7, and 8 is ±0.5% of the maximum range span.

　 Range error: the error for ranges 4, 5, 6, 7, and 8 is -1±0.25%/6.89MPa of the maximum range span, and the error for range 3 is -1.5±0.25%. This is a system error and can be eliminated by calibrating according to the actual static pressure before installation.

    Power supply effect: less than 0.005%/V of the output span

    Vibration effect: on any axis, at a frequency of 200Hz, the induced error is ±0.05%/g of the maximum range span.

    Load effect: as long as the voltage input to the transmitter is higher than 14.5V, there is no load effect within the load operating area.

    Installation position effect: the maximum zero shift error generated is no greater than 0.25 kPa, but it can be corrected and has no effect on the range;

Rotation of the measuring body relative to the flange has no effect.

    Electromagnetic radiation: compliant with IEC801 standard

Appearance and Structure

 Structural materials:

        Isolation diaphragm and vent/drain valve: 316 stainless steel, Hastelloy C, Monel;

　　  Flange and joint: 316 stainless steel, Hastelloy C, Monel;

        “O” ring（in contact with the measured medium）: fluororubber, nitrile rubber, ethylene-propylene;

　　  Fill fluid: silicone oil;

　　  Bolts: carbon steel galvanized, 1Cr18Ni9, 0Cr17Ni4CuNb, 42CrMo;

        Electrical housing: low-copper aluminum alloy;

        Coating: epoxy resin;

        Pressure connection: for ranges 3, 4, and 5, the center hole distance of the threaded connection between the two flanges is 1/4-18NPT and is 54mm;

　　　　　　　  joint 1/2-14NPT or M20X1.5 male thread; with spherical cone surface seal and joint, the center distance is 50.8, 54, 57.2mm;

        Weight:   3.5kg（excluding optional accessories）

Since its establishment, Xi'an Shenghongchuang Instrument Co., Ltd. has mainly been engaged in the R&D and production of pressure, level, temperature, differential pressure, digital display, weighing, and flow instruments. Its main products include Swiss metallux ceramic piezoresistive sensors and self-developed ceramic capacitive pressure sensors. Diffused silicon, ceramic piezoresistive, strain gauge, metal capacitive, ceramic capacitive pressure transmitters, remote pressure transmitters, high-temperature pressure transmitters, flush diaphragm pressure transmitters, anti-corrosion pressure transmitters, integrated/split level transmitters, anti-corrosion level transmitters, lightning protection level transmitters, high-temperature guided pressure level transmitters, straight rod level transmitters, flange level transmitters, wind pressure transmitters, metal capacitive differential pressure transmitters, diffused silicon differential pressure transmitters, pressure controllers, thermocouple/RTD temperature transmitters, ultrasonic level meters

Notes 1.All supplied products are accompanied by a product certificate and instruction manual, including product number, technical parameters, wiring, factory date, etc. Please check carefully to avoid incorrect use. 2.Wiring should be carried out strictly in accordance with our company's instructions for use. 3.This product is a precision instrument. Random disassembly, impact, dropping, or poking the sensor with sharp tools is prohibited. 4.The transmitter can work immediately after power-on, but the output becomes stable after preheating for 30 minutes. 5.If any abnormality is found during use, turn off the power, stop using it, inspect it, or directly contact our company's technical department. 6.During transportation and storage, restore the original packaging and store it in a cool, dry, and ventilated warehouse. 7.The quality warranty period is 12 months（damage caused by improper use such as pressure overload and incorrect wiring is not covered by the quality warranty）. 8.Special products are customized products and do not participate in the 7-day no-reason return policy. Customized products have a lead time and are non-returnable and non-exchangeable.