The capacitive smart pressure/differential pressure/level transmitter is a high-precision intelligent instrument product independently researched, developed, and manufactured by our company on the basis of many years of scientific research and practical experience.

The smart pressure/differential pressure/level transmitter is a new-generation intelligent transmitter manufactured by adopting a sensor core produced with ROSEMOUNT technology and integrating the advanced digital technology developed by our company. In principle, it uses a direct digital capacitance circuit to replace the analog signal amplification circuit and A/D conversion circuit, and applies digital compensation technology to compensate for temperature and static pressure, thereby improving measurement accuracy and reducing temperature drift. The complete transmitter features small size, high reliability, and good long-term stability. With an extremely high cost-performance ratio, this product has become a mainstream product in the transmitter market.

This smart pressure/differential pressure/level transmitter features a novel design principle, a complete range of models and specifications, convenient installation and use, and safety explosion-proof performance. It is especially renowned for high accuracy, compact size, light weight, convenient adjustment, good long-term stability, strong one-way overload protection capability, and suitability for use in harsh environments. Therefore, it enjoys a high reputation in both domestic and international markets. This series of Class 0.1 capacitive smart transmitters includes pressure, differential pressure, absolute pressure, remote transmission, level, and other types, and is equipped with corresponding optional products. It can be widely used in industries such as electric power, metallurgy, petrochemicals, and instrument processing, and complies with the "IEC" standards implemented in China.

Product Features

·The use of a microprocessor provides greater flexibility and enhanced functions;

·Strong self-diagnostic capability;

·Wide measuring range coverage 0～0.2kPa…10MPa;

·Accuracy up to Class 0.1, with a turndown ratio better than 40：1;

·Zero point and span adjustment do not affect each other;

·Both remote and local span and zero point are adjustable;

·Two-wire system, compliant with HART protocol, enabling digital communication with ROSEMOUNT275 and MS-H376 handheld communicators without interrupting the analog output;

·The sensor is equipped with non-volatile memory;

·Good stability, high accuracy, adjustable damping, and strong resistance to one-way overload;

·No mechanical transmission parts, low maintenance workload, sturdy and vibration-resistant;

·All parts are universal; interchangeability between the sensor and electronic circuit board does not affect transmitter performance, making maintenance more convenient;

·Optional diaphragm materials for contact media, explosion-proof housing structure;

·Proven superiority and reliability in the industry.

Performance Parameters

Technical Performance

Applicable media: liquid, gas, or steam

Measuring range: Range 3  0-0.2～6.0kPa

Range 4  0-6.0～40.0kPa

Range 5  0-40.0～200kPa

Range 6  0-0.16～1.0MPa

Range 7  0-0.4～2.0MPa

Range 8  0-1.6～10MPa

Output signal: linear output: 4~20mA output superimposed with HART protocol digital signal（two-wire system）；

Square root output: within 1.0%~100% of the input pressure, the output has a square root relationship with differential pressure; within 0%~0.1%, the output has a segmented linear relationship with differential pressure; there is no sudden jump within 4~20mADC output, superimposed with HART? protocol digital signal(two-wire system), and users can select linear output or square root output according to site conditions.

Power      supply: externally supplied 24V DC, （power supply range14.5V~45V）

Load characteristics: maximum permissible load resistance in the load resistor circuit Rmax=(E-10.5)/0.0236(Ω)

Installation in hazardous locations: flameproof type Exd Ⅱ CT6；

                intrinsically safe type Exia Ⅱ CT6；

Load characteristics: after positive and negative migration, the upper and lower limits of the range shall not exceed the limits of the range. At the minimum range, the maximum positive migration is 0.975URL; the maximum negative migration is -URL. Under square root output, positive and negative migration can calibrate 10% of the flow range.

Temperature range: medium temperature　　　　　-40～100℃

  　      storage temperature　　　　　-40～100℃

    　    complete unit operating temperature　　　-40～85℃

Relative humidity: 0～100%

Overpressure limit: applying 0（absolute pressure）~13.76MPa pressure to either side of the transmitter will not damage the transmitter; the flange can withstand 68.9MPa pressure; normal operating pressure should be within 3.45kPa（absolute pressure） to the upper limit of the transmitter range.

Volume change: less than 0.16cm3

Damping: the time constant is adjustable between 0.2～32.0s.

Startup time: 3s, no preheating required.

Performance Indicators:

   （Under standard test conditions with no migration, 316 stainless steel isolation diaphragm, and other standard test conditions.）

    Turndown ratio: 40：1

    Accuracy: ranges 3、4、5

　　　　              when the turndown ratio is 1：1 to 10：1, it is ±0.1% of the calibrated range,

                      when the turndown ratio is 10：1 to 40：1, it is ±0.05（1+0.1URL/range）% range,

                ranges 6、7、8

                      when the turndown ratio is 1：1 to 10：1, it is ±0.15% of the calibrated range,

                      when the turndown ratio is 10：1 to 40：1, it is ±0.075（1+0.1URL/range）% range,

    Stability: six-month error is ±0.15% of the maximum range；

    Temperature effect: ranges 4、5、6、7、8

                   zero error is ±0.25%/55℃ of the maximum range.

　　　　　    total error including span and zero is ±0.5%/55℃ of the maximum range.

　　　　Note: for range 3, the temperature error should be doubled.

    Overpressure effect: after applying pressure of 140kgf/cm2, the error is ±0.25% of the maximum range.

    Static pressure effect: under linear output, zero error: after applying static pressure of 140kgf/cm2, the zero error for ranges 4、5 is ±0.25% of the maximum range, and the zero error for ranges 3、6、7、8 is ±0.5% of the maximum range.

　 Span error: the errors for ranges 4、5、6、7、8 are -1±0.25%/6.89MPa of the maximum range, and the error for range 3 is -1.5±0.25% of the maximum range. This is a system error and can be eliminated by calibration according to the actual static pressure before installation.

    Power supply effect: less than 0.005%/V of output range

    Vibration effect: on any axis, at a frequency of 200Hz, the induced error is ±0.05%/g of the maximum range.

    Load effect: as long as the input voltage to the transmitter is higher than 14.5V, there is no load effect within the load operating region.

    Installation position effect: a zero shift error of no more than 0.25 kPa may be generated, but it can be corrected and has no effect on the range;

The rotation of the measuring body relative to the flange has no effect.

    Electromagnetic radiation: compliant with IEC801 standard

Appearance and Structure

 Structural materials:

        Isolation diaphragm and vent/drain valve: 316 stainless steel, Hastelloy C, Monel；

　　  Flange and connector: 316 stainless steel, Hastelloy C, Monel；

        “O” ring（in contact with the measured medium）: fluororubber, nitrile rubber, ethylene-propylene；

　　  Filling liquid: silicone oil；

　　  Bolts: carbon steel zinc-plated、1Cr18Ni9、0Cr17Ni4CuNb、42CrMo；

        Electrical housing: low-copper aluminum alloy；

        Coating: epoxy resin；

        Pressure connection: for ranges 3、4、5, the center distance of the two-flange connection thread 1/4-18NPT is 54mm；

　　　　　　　　  Connector 1/2-14NPT or M20X1.5 male thread；when using ball-cone sealing with connector, center distance is 50.8、54、57.2mm；

        Weight:   3.5kg（excluding options）

Since its establishment, Xi'an Shenghongchuang Instrument Co., Ltd. has mainly engaged in the R&D and production of pressure, level, temperature, differential pressure, digital display, weighing, and flow instruments. Its main products include Swiss metallux ceramic piezoresistive sensors and self-developed ceramic capacitive pressure sensors. Diffused silicon, ceramic piezoresistive, strain gauge, metal capacitive, ceramic capacitive pressure transmitters, remote pressure transmitters, high-temperature pressure transmitters, flush diaphragm pressure transmitters, anti-corrosion pressure transmitters, integrated/split type level transmitters, anti-corrosion level transmitters, lightning protection level transmitters, high-temperature guided-pressure level transmitters, rigid rod level transmitters, flange level transmitters, air pressure transmitters, metal capacitive differential pressure transmitters, diffused silicon differential pressure transmitters, pressure controllers, thermocouple/RTD temperature transmitters, ultrasonic level meters

Notes 1.All supplied products are provided with product certificates and instructions, including product number, technical parameters, wiring, date of manufacture, etc. Please check carefully to avoid incorrect use.2.Wiring must be carried out strictly in accordance with our company's instructions for use.3.This product is a precision instrument. Random disassembly, impact, dropping, or poking the sensor with sharp tools is prohibited.4.The transmitter can operate immediately after power-on, but the output becomes stable after 30 minutes of preheating.5.If any abnormality is found during use, the power supply should be turned off, use should be stopped, and inspection should be carried out, or contact our company's technical department directly.6.During transportation and storage, restore the original packaging and store it in a cool, dry, and ventilated warehouse.7.The quality warranty period is 12 months（damage caused by improper use such as pressure overload, incorrect wiring, etc. is not covered by the quality warranty）.8.Special products are customized products, do not participate in 7-day no-reason return, and customized products have a delivery period, no return and no exchange.