The capacitive intelligent pressure/differential pressure/level transmitter is a high-precision intelligent instrument product independently researched, developed, and manufactured by our company based on many years of scientific research and practical experience.

The intelligent pressure/differential pressure/level transmitter is a new-generation intelligent transmitter manufactured by adopting a sensor core produced with ROSEMOUNT technology and integrating the advanced digital technology developed by our company. In principle, it uses a direct digital capacitance circuit to replace the analog signal amplification circuit and A/D conversion circuit, and adopts digital compensation technology to compensate for temperature and static pressure, thereby improving measurement accuracy and reducing temperature drift. The transmitter features small size, high reliability, and excellent long-term stability. With an extremely high cost-performance ratio, this product has become a mainstream product in the transmitter market.

This intelligent pressure/differential pressure/level transmitter features a novel design principle, a complete range of models and specifications, easy installation and operation, and safety explosion-proof performance. It is especially renowned for high accuracy, compact size, light weight, convenient adjustment, excellent long-term stability, strong one-way overload protection capability, and suitability for use in harsh environments. Therefore, it enjoys a high reputation in domestic and international markets. This series of 0.1-grade capacitive intelligent transmitters includes pressure, differential pressure, absolute pressure, remote transmission, level, and other types, and is equipped with corresponding optional products. It can be widely used in industries such as electric power, metallurgy, petrochemical, and instrument processing, and complies with the IEC standards promoted in China.

Product Features

·The use of a microprocessor provides greater flexibility and enhanced functions;

·Strong self-diagnostic capability;

·Wide measuring range coverage 0～0.2kPa…10MPa;

·Accuracy up to 0.1 grade, with a turndown ratio better than 40：1;

·Zero point and span adjustments do not affect each other;

·Supports both remote and local adjustment of span and zero point;

·Two-wire system, compliant with HART protocol, capable of digital communication with ROSEMOUNT275 and MS-H376 handheld communicators without interrupting analog output;

·The sensor has built-in non-volatile memory;

·Good stability, high accuracy, adjustable damping, and strong resistance to one-way overload;

·No mechanical transmission parts, less maintenance work, sturdy and vibration-resistant;

·All universal parts; interchange of the sensor and electronic circuit board does not affect transmitter performance, making maintenance more convenient;

·Optional diaphragm materials for contact with the measured medium, explosion-proof housing structure;

·Industry-proven superiority and reliability.

Performance Parameters

Technical Performance

Applicable media: liquid, gas, or vapor

Measurement range: Range 3  0-0.2～6.0kPa

Range 4  0-6.0～40.0kPa

Range 5  0-40.0～200kPa

Range 6  0-0.16～1.0MPa

Range 7  0-0.4～2.0MPa

Range 8  0-1.6～10MPa

Output signal: linear output: 4~20mA output superimposed with HART protocol digital signal（two-wire system）；

Square root output: within 1.0%~100% input pressure, the output has a square root relationship with differential pressure; within 0%~0.1%, the output has a segmented linear relationship with differential pressure; there is no abrupt change within 4~20mADC output, superimposed with HART? protocol digital signal(two-wire system), and users may select linear output or square root output according to on-site conditions.

Power      supply: external 24V DC power supply, （power supply range 14.5V~45V）

Load characteristics: the maximum load resistance allowed in the load resistor circuit is Rmax=(E-10.5)/0.0236(Ω)

Installation in hazardous locations: flameproof type Exd Ⅱ CT6；

                intrinsically safe type Exia Ⅱ CT6；

Load characteristics: after positive or negative shift, the upper and lower range limits shall not exceed the range limits. At the minimum range, the maximum positive shift is 0.975URL; the maximum negative shift is -URL. For square root output, positive and negative shift can calibrate 10% of the flow range.

Temperature range: medium temperature　　　　-40～100℃

  　      storage temperature　　　　-40～100℃

    　    operating temperature of the whole unit　　-40～85℃

Relative humidity: 0～100%

Overpressure limit: applying 0（absolute pressure）~13.76MPa pressure to either side of the transmitter will not damage the transmitter; the flange can withstand 68.9MPa pressure; normal operating pressure should be within 3.45kPa（absolute pressure） to the upper range limit of the transmitter.

Volume change: less than 0.16cm3

Damping: adjustable time constant between 0.2～32.0s.

Start-up time: 3s, no preheating required.

Performance indexes:

   （under standard test conditions with no shift, 316 stainless steel isolation diaphragm, and other standard conditions.）

    Turndown ratio: 40：1

    Accuracy: ranges 3, 4, 5

　　　              when the turndown ratio is 1：1 to 10：1, it is ±0.1% of calibrated span,

                      when the turndown ratio is 10：1 to 40：1, it is ±0.05（1+0.1URL/span）% span,

                ranges 6, 7, 8

                      when the turndown ratio is 1：1 to 10：1, it is ±0.15% of calibrated span,

                      when the turndown ratio is 10：1 to 40：1, it is ±0.075（1+0.1URL/span）% span,

    Stability: six-month error is ±0.15% of maximum span；

    Temperature effect: ranges 4, 5, 6, 7, 8

                    zero error is ±0.25%/55℃ of maximum span.

　　　　　    total error including span and zero point is ±0.5%/55℃ of maximum span.

　　　　Note: for range 3, the temperature error should be doubled.

    Overpressure effect: after applying 140kgf/cm2 pressure, the error is ±0.25% of maximum span range.

    Static pressure effect: under linear output, zero error: after applying static pressure of 140kgf/cm2, the zero error for ranges 4 and 5 is ±0.25% of maximum span range, and the zero error for ranges 3, 6, 7, and 8 is ±0.5% of maximum span range.

　 Span error: the error for ranges 4, 5, 6, 7, and 8 is -1±0.25%/6.89MPa of maximum span range, and the error for range 3 is -1.5±0.25%. This is a system error and can be eliminated by calibrating according to the actual static pressure before installation.

    Power supply effect: less than 0.005%/V of output span

    Vibration effect: on any axis, at a frequency of 200Hz, the induced error is ±0.05%/g of maximum span range.

    Load effect: as long as the input voltage to the transmitter is higher than 14.5V, there is no load effect within the load operating area.

    Installation position effect: the maximum zero shift error generated is no greater than 0.25 kPa, but it can be corrected, with no effect on span;

Rotation of the measuring body relative to the flange has no effect.

    Electromagnetic radiation: complies with IEC801 standard

Appearance and Structure

 Structural materials:

        Isolation diaphragm and vent/drain valve: 316 stainless steel, Hastelloy C, Monel;

　　  Flange and joint: 316 stainless steel, Hastelloy C, Monel;

        “O” ring（in contact with measured medium）: fluororubber, nitrile rubber, ethylene-propylene;

　　  Filling liquid: silicone oil;

　　  Bolt: carbon steel zinc-plated, 1Cr18Ni9, 0Cr17Ni4CuNb, 42CrMo;

        Electrical housing: low-copper aluminum alloy;

        Coating: polyurethane epoxy resin;

        Pressure connection fitting: for ranges 3, 4, and 5, the center hole distance of the two-flange connection thread 1/4-18NPT is 54mm;

　　　　　　　　  joint 1/2-14NPT or M20X1.5 male thread; with ball cone surface seal and joint, the center distance is 50.8, 54, 57.2mm;

        Weight:  3.5kg（excluding options）

Since its establishment, Xi'an Shenghongchuang Instrument Co., Ltd. has mainly been engaged in the R&D and production of pressure, level, temperature, differential pressure, digital display, weighing, and flow instruments. Its main products include Swiss metallux ceramic piezoresistive sensors and self-developed ceramic capacitive pressure sensors. Diffused silicon, ceramic piezoresistive, strain gauge, metal capacitive, ceramic capacitive pressure transmitters, remote pressure transmitters, high-temperature pressure transmitters, flush diaphragm pressure transmitters, anti-corrosion pressure transmitters, integrated/split level transmitters, anti-corrosion level transmitters, lightning-proof level transmitters, high-temperature guided pressure level transmitters, rigid rod level transmitters, flange level transmitters, air pressure transmitters, metal capacitive differential pressure transmitters, diffused silicon differential pressure transmitters, pressure controllers, thermocouple/RTD temperature transmitters, ultrasonic level gauges

Notes 1.All supplied products are provided with a product certificate and instruction manual, including product number, technical parameters, wiring, ex-factory date, etc. Please carefully verify them to avoid misuse. 2.Wiring must be carried out strictly in accordance with our company's instructions for use. 3.This product is a precision instrument. Random disassembly, collision, dropping, or poking the sensor with sharp tools is prohibited. 4.The transmitter can operate immediately after power-on, but the output becomes stable after 30 minutes of preheating. 5.If any abnormality is found during use, the power supply should be turned off, use should be stopped, inspection should be carried out, or our company's technical department should be contacted directly. 6.During transportation and storage, restore the original packaging and store it in a cool, dry, and ventilated warehouse. 7.The quality warranty period is 12 months（damage caused by improper use such as pressure overload or wiring errors is not covered by the quality warranty）. 8.Special products are customized products and do not participate in the 7-day no-reason return policy. Customized products have a delivery lead time and are non-returnable and non-exchangeable.