I. Product Overview

The digital display instrument works with various sensors and transmitters with analog output to complete the measurement, conversion, display, and control of physical quantities such as temperature, pressure, liquid level, and composition

II. Functional Features

◆Error less than 0.5%F.S, with calibration and digital filtering functions

◆Suitable for signal types such as standard voltage, current, thermal resistance, and thermocouple

◆2 alarm outputs, with selectable high-limit alarm or low-limit alarm modes. Alarm sensitivity can be set independently

◆Transmitter output (optional), which can output the measured and converted display value in the form of standard current and voltage for use by other equipment

III. Technical Specifications

◆Power    Supply: 85V AC~265V AC, 100VDC~380VDC, power consumption less than 6W

               10VDC~36VDC, power consumption less than 6W

Note: A certain power margin should be reserved for DC power supply. Please configure the power supply according to 24VDC/0.5A, 12VDC/2A for each unit. Also pay attention to the power cable length and wire diameter.

◆Operating environment: 0℃~50℃, humidity lower than 90%R.H, non-condensing.

◆Display range: -1999~9999, decimal point position can be set

◆Input signal type: universal input, selectable through parameter settings

◆Basic error: less than 0.5%F.S

◆Measurement control cycle: 0.2 seconds

◆Alarm output: 2 relay outputs, contact capacity 220V AC, 3A

◆Transmitter output:

Photoelectric isolation, output resolution 1/3000, error less than ±0.2% F.S

DC current or DC voltage output must be specified when ordering, load capacity greater than 600Ω.

For DC current output, 4mA~20mA, 0mA~10mA, 0mA~20mA can be selected through settings; for DC voltage output, 1V~5V, 0V~5V can be selected through settings.

0V~10V transmitter output must be specified when ordering

Transmitter output is an optional function and must be specified when ordering, otherwise the instrument does not have this function.

When external 12V supply is provided and the instrument also has A1 or A2 model transmitter output function, the transmitter output load capacity is 450Ω

◆External power supply

Used to supply power to the transmitter, with an error between the output value and the nominal value less than ±5%

Other specifications must be specified when ordering

The external power supply of the instrument can only be used together with the sensor or transmitter connected to the instrument