Introduction

When purchasing the YSZK-01A-C pressure transmitter，price is one of the factors users care about most。As a high-performance diffused silicon liquid and gas pressure sensor，its accuracy and reliability are widely recognized。This article will provide a detailed introduction to the price range，performance features，and purchasing key points of the YSZK-01A-C，helping you make an informed decision。At the same time，we will also compare the differences with similar products such as SSM-P202，YM-TPJ，so that you can gain a comprehensive understanding of market conditions。

Price Range of the YSZK-01A-C Pressure Transmitter

The price of the YSZK-01A-C pressure transmitter is usually between 2000 yuan and 5000 yuan，with the specific price depending on the purchasing channel，order quantity，and additional services（such as calibration certificates or extended warranties）。Compared with similar products on the market such as SSM-P202，YM-TPJ，the YSZK-01A-C offers particularly outstanding cost-effectiveness。Its core advantage lies in the use of high-precision diffused silicon technology，which enables stable measurement of liquid and gas pressure，making it suitable for multiple fields such as industrial automation，petrochemical，and water treatment。If you need a more specific quotation，it is recommended to contact the manufacturer or authorized distributor directly to obtain the latest pricing information。

Performance Features and Technical Advantages

The YSZK-01A-C pressure transmitter adopts advanced diffused silicon sensing technology，featuring high accuracy，high stability，and long service life。It has a wide measurement range，covering from 0-100kPa to 0-60MPa，meeting the needs of different operating conditions。In addition，this transmitter also has excellent anti-interference capability，allowing it to operate stably in harsh environments。Compared with similar products such as FST800-401P246C-60B，the YSZK-01A-C has a faster response speed，higher accuracy，and an error range controlled within ±0.1%。These features make it an ideal choice in the field of industrial automation。

Purchasing Key Points and Market Comparison

When purchasing the YSZK-01A-C pressure transmitter，in addition to price，you should also pay attention to the following key factors：measurement range，accuracy class，output signal type（such as 4-20mA or RS485），protection rating（IP65 or higher），and whether it has explosion-proof certification。Similar products on the market such as TV-TV510，SY-SY215 may be priced lower，but they are often inferior to the YSZK-01A-C in terms of performance and reliability。For example，although SSM-P200 is moderately priced，its vibration resistance is relatively poor，making it unsuitable for high-vibration environments。Therefore，users should conduct a comprehensive evaluation based on actual needs when purchasing，so as to avoid affecting performance due to choosing a low price。

Application Scenarios and Customer Cases

The YSZK-01A-C pressure transmitter is widely used in industries such as petrochemical，water treatment，food and beverage，and pharmaceuticals。For example，in a large-scale petrochemical project，the YSZK-01A-C was used to monitor gas pressure inside pipelines，and its high accuracy and stability ensured the smooth operation of the production process。Another case is a water treatment plant，where the installation of the YSZK-01A-C enabled real-time monitoring of the outlet pressure of water pumps，effectively preventing equipment failures。These practical application cases fully demonstrate the reliability and practicality of the YSZK-01A-C。

Frequently Asked Questions（FAQ）

Q: What should be noted when installing the YSZK-01A-C pressure transmitter？
A: During installation，strong vibration or impact should be avoided，and the sealing surface should be kept clean and free of leakage。For liquid media，vertical installation is recommended to eliminate the influence of air bubbles。
Q: How to calibrate the YSZK-01A-C pressure transmitter？
A: Calibration requires the use of a standard pressure source and a precision ammeter，and should be performed according to the calibration steps provided by the manufacturer。Regular calibration is recommended to ensure measurement accuracy。
Q: What advantages does the YSZK-01A-C have compared with YM-XWJ？
A: The YSZK-01A-C has higher accuracy，stronger anti-interference capability，and is suitable for a wider pressure range。

Why Choose Us

As a professional pressure transmitter supplier，we not only provide high-quality YSZK-01A-C products，but also offer comprehensive pre-sales consultation and after-sales service。Our technical team is always ready to answer your questions，ensuring that you choose the most suitable product。If you have any requirements for the YSZK-01A-C or other models of pressure transmitters，please feel free to contact us at any time for professional advice and preferential quotations。