Introduction

Xi'an Shenghongchuang Instrumentation Co., Ltd. has grandly launched the new RSW13 weighing sensor, with a volume 30% smaller than traditional models, breaking through the miniaturization limits of the industry. This micro force sensor adopts an innovative structural design, perfectly solving the installation challenges in confined spaces and providing a more precise force measurement solution for flow control equipment.

In the field of flow control equipment, space constraints have always been a major challenge faced by technical evaluators. Traditional weighing sensors are bulky and complicated to install, making it difficult to meet the demand of modern industrial equipment for compact design. The launch of the RSW13 weighing sensor marks a new era for micro force sensor technology, providing the industry with more flexible and more efficient solutions.

Core Advantages of the RSW13 Weighing Sensor

Breakthrough Miniaturized Design

The RSW13 weighing sensor adopts advanced miniaturization technology, with overall dimensions 30% smaller than traditional models and weight reduced by 25%, making it one of the most compact micro force sensors currently on the market. This breakthrough design enables easy installation in space-limited flow control equipment, such as pipeline systems, valve actuators, and other positions where traditional sensors are difficult to deploy.

Compared with similar products such as the EVT-14 weighing sensor and the NOS-W401 weighing sensor, RSW13 achieves a smaller size while maintaining the same measurement accuracy. Its unique coin-type pressure sensor structure is especially suitable for application scenarios requiring concealed installation.

Outstanding Measurement Performance

Despite its reduced size, the performance of the RSW13 weighing sensor is not compromised in the slightest. It adopts high-precision strain gauge technology, achieving a measurement accuracy of ±0.1%FS and a response time of less than 1ms, fully meeting the stringent requirements of flow control equipment for real-time force monitoring.

Compared with traditional models such as the CHM1 weighing sensor and the CFBH weighing sensor, RSW13 shows significant improvements in key indicators such as temperature drift and long-term stability. After rigorous testing, within the operating temperature range of -20℃至80℃, its temperature drift coefficient is less than 0.005%/℃, ensuring reliable measurement data under various environmental conditions.

Innovative Technology Analysis

Patented Structural Design

The core innovation of the RSW13 weighing sensor lies in its unique structural design. It adopts an integrated stainless steel housing, with micro force sensor components integrated inside. By optimizing the mechanical transmission path, it achieves high-sensitivity measurement in a compact size. Compared with products such as the NOS-F305 weighing sensor and the NOS-W406 weighing sensor, this design offers better resistance to lateral forces.

A special sealing process is used inside the sensor, achieving a protection rating of IP67, making it suitable for harsh environments commonly found in flow control equipment, such as humidity and dust. At the same time, its compact structure also reduces the impact of mechanical vibration on measurement results, improving the overall stability of the system.

Intelligent Signal Processing

The RSW13 weighing sensor has a built-in high-performance signal conditioning circuit, supporting standard analog output（4-20mA/0-10V）and digital interface（RS485）, enabling seamless integration with various types of flow control equipment. Compared with products such as the HDW209 weighing sensor and the RSW10B weighing sensor, its digital output version supports richer communication protocols for easier system integration.

The sensor also features self-diagnosis functions, enabling real-time monitoring of operating status and timely detection of abnormal conditions such as overload and wiring errors, greatly reducing system maintenance costs. These intelligent features enable it to perform exceptionally well in complex flow control systems.

Industry Application Cases

Flow Control Valve Force Monitoring

In the flow control system of a large petrochemical enterprise, the traditional CFBHM weighing sensor could not be installed on a critical valve due to its excessive size. After switching to the RSW13 weighing sensor, not only was the space limitation resolved, but more accurate valve stem force monitoring was also achieved, improving the system's control accuracy by 15%.

Micro Pump Station Force Feedback System

In a micro pump station retrofit project for an urban water supply network, the RSW13 weighing sensor, with its small-size advantage, was successfully integrated into the original compact space, enabling real-time monitoring of pump shaft thrust and providing reliable data support for preventive maintenance.

Product Specification Comparison

Summary and Call to Action

The RSW13 weighing sensor represents the latest development direction in micro force sensor technology, and its breakthrough miniaturized design provides unprecedented installation flexibility for flow control equipment. Whether for space-constrained valve actuators or pump station systems requiring concealed installation, RSW13 can provide precise and reliable force measurement solutions.

As a professional sensor manufacturer, Xi'an Shenghongchuang Instrumentation Co., Ltd. continues to launch innovative products by leveraging many years of technical expertise. In addition to RSW13, we also offer various models of weighing sensors such as EVT-14, NOS-W401, and NOS-F305 to meet the needs of different application scenarios.

If you would like to learn more about the technical details of the RSW13 weighing sensor or other micro force sensors, please feel free to contact our technical team. Based on your specific application requirements, we will provide professional product selection recommendations and customized solutions. Contact us now and start your journey toward precision measurement!