As a professional flow control equipment manufacturer, Xi'an Shenghongchuang Instrument Co., Ltd. provides you with the XEW503 split-type submersible level transmitter manual download and interpretation of key parameters. This article provides a detailed analysis of core parameters such as the XEW502 model specification and the PTJ301S-01 accuracy class, and answers practical questions including common issues with the YWKT-150 and troubleshooting for the KZY-KO-LAG, helping distributors and end users fully understand product performance and application techniques.

1. Product Definition and Technical Overview

The XEW503 split-type submersible level transmitter adopts diffused silicon piezoresistive sensing technology and is specially designed for liquid storage tanks, deep wells, and corrosive media environments. Its split structure separates the sensor from the transmitter module and connects them via an armored cable, making it suitable for complex working conditions such as high temperature and strong vibration. The product complies with the GB/T 17614-2015 standard for transmitters used in industrial process control systems, with core parameters including a 0.1%FS accuracy class, a -20℃~85℃ operating temperature range, and an IP68 protection rating.

2. Comparative Analysis of Key Parameters

3. Typical Troubleshooting Guide

For common faults of the KZY-KO-LAG split-type submersible level transmitter, the following solutions are provided:

• Large display value fluctuation：Check whether the cable shielding layer is grounded, and confirm that the medium density parameter is set correctly
• No signal output：Use a multimeter to measure the supply voltage（must be 24VDC±10%）, and verify the YH800 wiring diagram specifications
• Zero drift：Perform dry calibration according to the JSCW-50 calibration procedure（zeroing operation in empty tank status）

4. Selection and Procurement Recommendations

When selecting the XY530BA split-type submersible level transmitter, the following should be considered：

1. Medium characteristics：For corrosive media, a 316L stainless steel diaphragm should be selected
2. Installation method：The fixed bracket should avoid resonance with the tank wall; refer to the YWKKT-1B working principle diagram
3. Certification requirements：For explosive environments, a model certified with ATEX or IECEx should be selected

5. Professional Technical Support Services

Xi'an Shenghongchuang Instrument Co., Ltd. provides：

• Free KZY-KO-LAGE calibration service（including third-party testing report）
• On-site commissioning training for the YWKT-150 split-type submersible level transmitter
• 24-hour technical response（including holidays）

Download the XEW503 split-type submersible level transmitter manual now, or call 029-84563217 for a customized solution.