KY-2 Pressure Transmitter Operation Guide: A Full Process Analysis from Installation to Maintenance

As a representative product of diffused silicon Hirschmann pressure sensors, the KY-2 pressure transmitter is widely used in the field of industrial automation control. This article will introduce in detail the correct use of the KY-2 pressure transmitter, helping operators quickly master installation and commissioning, parameter settings, and daily maintenance essentials to ensure stable equipment operation. As a professional manufacturer, Xi'an Shenghongchuang Instrument Co., Ltd. provides high-quality pressure sensor solutions.

1. KY-2 Pressure Transmitter Installation Specifications

1.Installation location selection:

• Avoid strong electromagnetic interference sources (such as frequency converters and high-power motors) within a range of 3 meters
• The medium flow direction should be consistent with the arrow marking direction on the sensor
• In vibration environments, shock-absorbing brackets must be installed

2.Key points for mechanical installation:

1. When using the M20×1.5 standard threaded interface, it is recommended to use a red copper gasket for sealing
2. For flange installation, ensure uniform force distribution, with torque controlled at 15-20N·m
3. When installed vertically, the electrical interface should face downward to prevent condensation from accumulating

Similar to domestic general-purpose pressure transmitter PM320 water pressure oil pressure air pressure sensor, products using a 316L stainless steel isolation diaphragm structure perform particularly well in corrosive media environments such as chemical and petroleum industries.

2. Electrical Connection and Parameter Configuration

Hirschmann connector wiring specifications:

Span calibration steps:

1. Adjust the zero point through the ZERO potentiometer (no-load state)
2. Apply full-scale pressure and calibrate using the SPAN potentiometer
3. Repeat the cycle 3 times to verify that the linearity error is ≤0.25%

3. Daily Maintenance and Troubleshooting

Periodic maintenance items:

• Check the aging condition of sealing components every month
• Calibrate zero drift every quarter (allowable ±0.1%FS)
• Carry out full-scale calibration every year

Common fault handling:

For working conditions requiring a higher medium temperature range (-40～+400℃), you may consider upgrading to the domestic general-purpose pressure transmitter PM320 series products.

4. Technical Advantages of Diffused Silicon Sensors

The core technical features adopted by KY-2 include:

• Temperature compensation technology: error ≤±0.5% within the range of -20～+85℃
• Overload-resistant design: 200% full-scale overpressure protection
• Media compatibility: achieved through the combination of 316L stainless steel and fluororubber seals

Professional Pressure Measurement Solutions

As a professional manufacturer of diffused silicon Hirschmann pressure sensors, Xi'an Shenghongchuang Instrument Co., Ltd. provides a full range of products from PT500-708 to PMP1400, meeting the precision measurement needs of different industries such as petroleum, chemical, and electric power. Our engineering team can provide you with:

• On-site installation guidance services
• Customized range design
• Annual maintenance service plans

Contact our technical consultants now to obtain sensor selection solutions and quotation lists tailored to your specific working conditions.