As a professional flow control equipment manufacturer, Xi’an Shenghongchuang provides you with a detailed explanation of the installation key points for the DJ-DJ1300 pressure transmitter. Improper installation of diffused silicon liquid and gas pressure sensors may lead to measurement errors or even equipment damage. This article specifically highlights the 3 most common incorrect operations to help technical evaluation personnel avoid installation risks.

I. Preparations Before Installing the DJ-DJ1300 Pressure Transmitter

Before installing the DJ-DJ1300 pressure transmitter, technical evaluation personnel need to make sufficient preparations. First, it is necessary to confirm whether the installation environment meets the requirements, including whether parameters such as temperature, humidity, and vibration are within the allowable range of the equipment. Second, it is necessary to check whether the pressure interface of the pipeline or container matches the interface of the transmitter to avoid leakage problems caused by interface mismatch. Finally, installation tools and materials, such as wrenches, sealant, and gaskets, need to be prepared to ensure the installation process proceeds smoothly.

II. Detailed Installation Steps for the DJ-DJ1300 Pressure Transmitter

1. Installation location selection: The DJ-DJ1300 pressure transmitter should be installed in a location convenient for maintenance and operation, while avoiding direct exposure to sunlight or rain. The installation location should be far away from vibration sources and electromagnetic interference sources to ensure measurement accuracy.

2. Interface connection: Use suitable sealing materials (such as PTFE gaskets) to ensure the sealing performance of the interface. Pay attention to the applied force during connection to avoid leakage or damage caused by over-tightening or over-loosening.

3. Electrical connection: Correctly connect the power supply and signal lines according to the manual, and ensure the polarity is correct. It is recommended to use shielded cables to reduce electromagnetic interference.

III. 3 Common Incorrect Operations and How to Avoid Them

1. Incorrect operation one: Ignoring environmental factors. Some technical evaluation personnel do not fully consider factors such as temperature and humidity in the installation environment, resulting in reduced equipment performance. Solution: Measure environmental parameters in advance to ensure they meet equipment requirements.

2. Incorrect operation two: Poor interface sealing. Using unsuitable sealing materials or improper installation force leads to leakage. Solution: Use the sealing materials recommended by the manufacturer and install according to the standard torque.

3. Incorrect operation three: Incorrect electrical connection. Incorrect connection of the power supply or signal lines may cause equipment damage or measurement errors. Solution: Strictly follow the manual for electrical connection and perform a double check.

IV. Technical Performance and Parameters of the DJ-DJ1300 Pressure Transmitter

V. Why Choose Xi’an Shenghongchuang Instrument Co., Ltd.

As a professional high-tech enterprise, Xi’an Shenghongchuang Instrument Co., Ltd. has many years of experience in the R&D and production of pressure transmitters. Our DJ-DJ1300 pressure transmitter adopts advanced diffused silicon technology to ensure high accuracy and long service life. In addition, we provide comprehensive technical support and after-sales service to help customers solve various problems encountered during installation and use.

If you have any questions about the installation or use of the DJ-DJ1300 pressure transmitter, please feel free to contact us at any time. Our professional team will provide you with detailed technical consultation and solutions.